Compare · release 2026.1

Side-by-side comparison

Pick ingredients, the extraction routes and the assays to compare. Each column is one extract; each cell is mean ± SD over its replicates.

Ingredients
Routes
Assays (none checked: all)

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Dot: extract mean; whisker: ± SD; a small number marks a value under the caveat of that number (listed below; hover for its text).

DLS - Particle Size v5.0

How large are the particles the protein forms in water?

Particle size (% of intensity) by hydrodynamic diameter, intensity (as measured); all runs · a panel per route, one line per ingredient; hover a line to see which

IPI isoelectric precipitation · 2

0 2.5 5 7.5 10 1 nm 10 nm 100 nm 1 µm

MPI micellar isolation · 2

0 2.5 5 7.5 10 1 nm 10 nm 100 nm 1 µm

MEM membrane concentration · 2

0 2.5 5 7.5 10 1 nm 10 nm 100 nm 1 µm

HYD hydrated as supplied · 1

0 2.5 5 7.5 10 1 nm 10 nm 100 nm 1 µm
Particle size (hydrodynamic diameter); 0.1 M phosphate buffer pH 7, 0.1 % protein (nm) by ingredient and route
100 1,000 Pea concentrate Pea flour Pea isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ×/÷ the geometric SD of the replicates (the spread on the log scale); dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order; log scale.

Polydispersity index; 0.1 M phosphate buffer pH 7, 0.1 % protein (%) by ingredient and route
15 20 25 30 Pea concentrate Pea flour Pea isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Table: mean ± SD (n) per extract
MetricUnit Pea flour, IPIDG-0004-IPIPea flour, MPIDG-0004-MPIPea flour, MEMDG-0004-MEMPea concentrate, IPIDG-0006-IPIPea concentrate, MPIDG-0006-MPIPea concentrate, MEMDG-0006-MEMPea isolate, HYDDG-0011-HYD
Particle size (hydrodynamic diameter) nm 259 ± 74.0 (n=3) 338 ± 14.4 (n=3) 202 (n=1) 262 ± 18.7 (n=3) 217 ± 74.6 (n=3) 198 ± 7.37 (n=3) 150 ± 4.45 (n=3)
Polydispersity index % 25.3 ± 0.390 (n=3) 16.5 ± 6.37 (n=3) 23.5 (n=1) 17.3 ± 1.41 (n=3) 20.1 ± 9.31 (n=3) 22.2 ± 0.625 (n=3) 18.7 ± 3.40 (n=3)

DSC - Differential Scanning Calorimetry v5.0

At what temperature does the protein denature, if at all?

Thermogram (W/g) heat flow per gram against temperature, baseline-corrected so curves overlay (a straight line through 45-50 °C and 113-118 °C subtracted); endothermic down · a panel per route, one line per ingredient; hover a line to see which

IPI isoelectric precipitation · 2

-0.03 -0.02 -0.01 0 0.01 45 °C 60 °C 75 °C 90 °C 105 °C

MPI micellar isolation · 2

-0.03 -0.02 -0.01 0 0.01 45 °C 60 °C 75 °C 90 °C 105 °C

MEM membrane concentration · 2

-0.03 -0.02 -0.01 0 0.01 45 °C 60 °C 75 °C 90 °C 105 °C

HYD hydrated as supplied · 1

-0.03 -0.02 -0.01 0 0.01 45 °C 60 °C 75 °C 90 °C 105 °C

Pea concentratePea flourPea isolate

Denaturation onset temperature (°C) by ingredient and route
65 70 75 80 Pea concentrate Pea flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Denaturation peak temperature (°C) by ingredient and route
75 80 85 90 Pea concentrate Pea flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Denaturation enthalpy (J/g) by ingredient and route
0 2 4 6 Pea concentrate Pea flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Denaturation enthalpy per gram of protein (J/g protein) by ingredient and route
0 5 10 15 Pea concentrate Pea flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Table: mean ± SD (n) per extract
MetricUnit Pea flour, IPIDG-0004-IPIPea flour, MPIDG-0004-MPIPea flour, MEMDG-0004-MEMPea concentrate, IPIDG-0006-IPIPea concentrate, MPIDG-0006-MPIPea concentrate, MEMDG-0006-MEMPea isolate, HYDDG-0011-HYD
Denaturation peak temperature °C 87.4 ± 0.106 (n=2) 88.3 ± 0.112 (n=3) 79.8 (n=1)1 86.6 ± 1.26 (n=3) 87.9 ± 0.834 (n=2) 81.0 ± 0.247 (n=2) —
Denaturation onset temperature °C 76.8 ± 0.311 (n=2) 76.1 ± 0.773 (n=3) 67.6 (n=1)1 77.9 ± 1.04 (n=3) 73.8 ± 3.82 (n=2) 70.9 ± 0.940 (n=2) —
Denaturation enthalpy J/g 1.25 ± 0.00636 (n=2) 2.05 ± 0.116 (n=3) 0.0990 (n=1)1 1.08 ± 0.181 (n=3) 2.23 ± 2.58 (n=2) 0.147 ± 0.0191 (n=2) —
Denaturation enthalpy per gram of protein J/g protein 4.68 (n=2) 11.4 (n=3) 0.959 (n=1) 4.30 (n=3) 7.92 (n=2) 1.05 (n=2) —
Denaturation transition detected 1 — — — — — — no

Emulsion Capacity (Centrifugation) v5.1

How much of an oil and water mix does the protein turn into emulsion, and does it survive heating?

Emulsion layer, before heating (pale, behind) and after heating (% of height) by ingredient and route
30 40 50 60 70 Pea concentrate Pea flour Pea isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Pale bar behind: emulsified layer before heating (measured, % of the column); solid bar: the layer after 30 min at 80 °C, derived as capacity × heat stability ÷ 100, replicate by replicate. Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Emulsion heat stability (% of layer) by ingredient and route
90 100 110 120 Pea concentrate Pea flour Pea isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Table: mean ± SD (n) per extract
MetricUnit Pea flour, IPIDG-0004-IPIPea flour, MPIDG-0004-MPIPea flour, MEMDG-0004-MEMPea concentrate, IPIDG-0006-IPIPea concentrate, MPIDG-0006-MPIPea concentrate, MEMDG-0006-MEMPea isolate, HYDDG-0011-HYD
Emulsion capacity % of height 43.1 ± 1.41 (n=3)2 43.2 ± 0.543 (n=3)2 44.6 ± 1.27 (n=3)2 43.6 ± 0.394 (n=3)2 58.6 ± 0.728 (n=3)2 54.1 ± 1.19 (n=3)2 46.8 ± 0.796 (n=3)
Emulsion heat stability % of layer 93.2 ± 1.61 (n=3)2 95.5 ± 1.05 (n=3)2 96.1 ± 2.79 (n=3)2 100 ± 0 (n=3)2 101 ± 4.06 (n=3)2 109 ± 3.21 (n=3)2 98.9 ± 1.92 (n=3)

Emulsion Kinetics (Turbiscan) v5.0

How does an emulsion made with these proteins change over the course of an hour?

Emulsion stability over time (TSI) Turbiscan stability index against time; a higher index is a less stable emulsion · a panel per route, one line per ingredient; hover a line to see which

IPI isoelectric precipitation · 2

0 10 20 30 0 min 10 min 20 min 30 min 40 min 50 min

MPI micellar isolation · 2

0 10 20 30 0 min 10 min 20 min 30 min 40 min 50 min

MEM membrane concentration · 2

0 10 20 30 0 min 10 min 20 min 30 min 40 min 50 min

HYD hydrated as supplied · 1

0 10 20 30 0 min 10 min 20 min 30 min 40 min 50 min

Pea concentratePea flourPea isolate

Turbiscan Stability Index by ingredient and route
16 18 20 22 24 26 Pea concentrate Pea flour Pea isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Creaming index (% of height) by ingredient and route
0 10 20 30 Pea concentrate Pea flour Pea isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Table: mean ± SD (n) per extract
MetricUnit Pea flour, IPIDG-0004-IPIPea flour, MPIDG-0004-MPIPea flour, MEMDG-0004-MEMPea concentrate, IPIDG-0006-IPIPea concentrate, MPIDG-0006-MPIPea concentrate, MEMDG-0006-MEMPea isolate, HYDDG-0011-HYD
Creaming index % of height 18.2 ± 0.581 (n=3) 22.7 ± 1.41 (n=3) 22.3 ± 0.423 (n=3) 10.5 ± 0.685 (n=3) 11.4 ± 3.92 (n=3) 12.6 ± 1.14 (n=3) 5.67 ± 0.426 (n=3)
Turbiscan Stability Index 1 17.6 ± 0.658 (n=3) 21.2 ± 2.04 (n=3) 19.6 ± 0.127 (n=3) 17.3 ± 0.940 (n=3) 21.0 ± 3.37 (n=3) 20.2 ± 0.741 (n=3) 17.7 ± 0.899 (n=3)

Foaming Capacity v5.0

How much foam does the protein make, and how much of it is left after 30 minutes?

Foam capacity (% of liquid height) by ingredient and route
120 140 160 180 200 Pea concentrate Pea flour Pea isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Foam stability (% of initial foam) by ingredient and route
0 50 100 150 200 Pea concentrate Pea flour Pea isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Foam height, initial (pale, behind) and final (mm) by ingredient and route
0 10 20 30 Pea concentrate Pea flour Pea isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Pale bar behind: initial height; solid bar: final height. Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Foam capacity by foam stability a dot per extract
120 140 160 180 200 40 60 80 100 120 Foam capacity (% of liquid height) Foam stability (% of initial foam)

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Crosses: ± SD of each measure; dashed ring: under a caveat; bold outline: on your shortlist.

Table: mean ± SD (n) per extract
MetricUnit Pea flour, IPIDG-0004-IPIPea flour, MPIDG-0004-MPIPea flour, MEMDG-0004-MEMPea concentrate, IPIDG-0006-IPIPea concentrate, MPIDG-0006-MPIPea concentrate, MEMDG-0006-MEMPea isolate, HYDDG-0011-HYD
Foam capacity % of liquid height 150 ± 4.70 (n=3) 152 ± 5.59 (n=3) 160 ± 1.56 (n=3) 151 ± 4.06 (n=3) 129 ± 5.29 (n=3) 178 ± 13.6 (n=3) 162 ± 14.1 (n=3)
Foam height, final mm 8.17 ± 0.866 (n=3) 7.13 ± 0.451 (n=3) 15.4 ± 7.33 (n=3) 9.66 ± 0.756 (n=3) 4.56 ± 1.38 (n=3) 14.7 ± 1.30 (n=3) 7.46 ± 0.272 (n=3)
Foam height, initial mm 11.3 ± 1.16 (n=3) 11.7 ± 1.47 (n=3) 14.6 ± 0.836 (n=3) 12.5 ± 0.725 (n=3) 7.08 ± 0.350 (n=3) 19.2 ± 2.88 (n=3) 15.5 ± 3.28 (n=3)
Foam stability % of initial foam 72.5 ± 0.236 (n=3) 61.2 ± 6.00 (n=3) 106 ± 52.5 (n=3) 77.9 ± 10.8 (n=3) 64.2 ± 17.9 (n=3) 77.1 ± 6.46 (n=3) 50.0 ± 12.8 (n=3)

Gel Strength v5.0

How firm and springy a gel does the protein form when heated?

Texture profile (g) force against time over the two compressions · a panel per route, one line per ingredient; hover a line to see which

IPI isoelectric precipitation · 2

-10 0 10 20 30 40 0 s 2 s 4 s 6 s 8 s 10 s 12 s

MPI micellar isolation · 2

-10 0 10 20 30 40 0 s 2 s 4 s 6 s 8 s 10 s 12 s

MEM membrane concentration · 2

-10 0 10 20 30 40 0 s 2 s 4 s 6 s 8 s 10 s 12 s

HYD hydrated as supplied · 1

-10 0 10 20 30 40 0 s 2 s 4 s 6 s 8 s 10 s 12 s

Pea concentratePea flourPea isolate

Gel hardness (g) by ingredient and route
0 10 20 30 40 Pea concentrate Pea flour Pea isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Gel cohesiveness by ingredient and route
0.5 0.6 0.7 0.8 0.9 Pea concentrate Pea flour Pea isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Gel springiness by ingredient and route
0 0.25 0.5 0.75 1 Pea concentrate Pea flour Pea isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Table: mean ± SD (n) per extract
MetricUnit Pea flour, IPIDG-0004-IPIPea flour, MPIDG-0004-MPIPea flour, MEMDG-0004-MEMPea concentrate, IPIDG-0006-IPIPea concentrate, MPIDG-0006-MPIPea concentrate, MEMDG-0006-MEMPea isolate, HYDDG-0011-HYD
Gel cohesiveness 1 0.824 ± 0.0249 (n=4) 0.695 ± 0.0412 (n=4) 0.763 ± 0.0580 (n=6) 0.671 ± 0.0142 (n=6) 0.814 ± 0.0483 (n=8) 0.581 ± 0.0702 (n=6) 0.794 ± 0.0434 (n=6)
Gel hardness g 11.2 ± 0.569 (n=4) 6.58 ± 0.763 (n=4) 16.3 ± 1.86 (n=6) 30.6 ± 3.55 (n=6) 23.2 ± 4.50 (n=8) 25.1 ± 4.36 (n=6) 5.03 ± 0.157 (n=6)
Gel springiness 1 0.627 ± 0.0356 (n=4) 0.174 ± 0.0793 (n=4) 0.686 ± 0.0415 (n=6) 0.788 ± 0.0227 (n=6) 0.775 ± 0.0556 (n=8) 0.665 ± 0.0932 (n=6) 0.0702 ± 0.0665 (n=6)

LECO - Protein Content v3.0

How much protein is in the extract?

Protein, as is (% w/w) by ingredient and route
0 10 20 30 Pea concentrate Pea flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Protein, dry basis (% w/w dry basis) by ingredient and route
60 70 80 90 100 Pea concentrate Pea flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Nitrogen (% w/w) by ingredient and route
0 5 10 15 Pea concentrate Pea flour Pea isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Nitrogen-to-protein factor by ingredient and route
5.3 5.35 5.4 5.45 Pea concentrate Pea flour Pea isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Table: mean ± SD (n) per extract
MetricUnit Pea flour, IPIDG-0004-IPIPea flour, MPIDG-0004-MPIPea flour, MEMDG-0004-MEMPea concentrate, IPIDG-0006-IPIPea concentrate, MPIDG-0006-MPIPea concentrate, MEMDG-0006-MEMPea isolate, HYDDG-0011-HYD
Nitrogen-to-protein factor 1 5.35 ± 0 (n=3) 5.36 (n=1) 5.36 (n=1) 5.44 ± 0 (n=3) 5.44 ± 0 (n=3) 5.44 ± 0 (n=3) 5.45 (n=1)
Nitrogen % w/w 4.99 ± 0.0473 (n=3) 3.36 (n=1) 1.93 ± 0.0106 (n=2) 4.63 ± 0.156 (n=4) 5.17 ± 0.0123 (n=3) 2.56 ± 0.0183 (n=4) 12.1 (n=1)
Protein, as is % w/w 26.8 ± 0.251 (n=3) 18.0 (n=1) 10.3 (n=1) 25.0 ± 0.900 (n=3) 28.1 ± 0.0669 (n=3) 13.9 ± 0.101 (n=3) —
Protein, dry basis % w/w dry basis 73.2 ± 1.30 (n=3) 75.6 (n=1) 64.8 (n=1) 73.8 ± 2.98 (n=3) 88.4 ± 1.78 (n=3) 71.9 ± 0.853 (n=3) —

Moisture/Ash Content v1.0

How much water and mineral (ash) does it carry?

Moisture (% w/w) by ingredient and route
60 70 80 90 Pea concentrate Pea flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Ash, dry basis (% w/w dry basis) by ingredient and route
0 2 4 6 8 Pea concentrate Pea flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Table: mean ± SD (n) per extract
MetricUnit Pea flour, IPIDG-0004-IPIPea flour, MPIDG-0004-MPIPea flour, MEMDG-0004-MEMPea concentrate, IPIDG-0006-IPIPea concentrate, MPIDG-0006-MPIPea concentrate, MEMDG-0006-MEMPea isolate, HYDDG-0011-HYD
Ash, dry basis % w/w dry basis 2.84 ± 0.263 (n=3) 1.96 ± 0.0929 (n=3) 6.61 ± 0.173 (n=3) 2.05 ± 0.0656 (n=3) 0.870 ± 0.144 (n=3) 5.90 ± 0.347 (n=3) —
Moisture % w/w 63.4 ± 0.554 (n=3) 76.2 ± 0.251 (n=3) 84.1 ± 0.0529 (n=3) 66.1 ± 0.621 (n=3) 68.2 ± 0.635 (n=3) 80.6 ± 0.181 (n=3) —

Solubility (Bradford) v5.0

How much of the protein dissolves, and at which pH?

Protein in the dispersion, before centrifugation (mg/mL) across pH · a panel per route, one line per ingredient; hover a line to see which

IPI isoelectric precipitation · 2

0 5 10 15 20 pH 4 pH 5 pH 6 pH 7 pH 8

MPI micellar isolation · 2

0 5 10 15 20 pH 4 pH 5 pH 6 pH 7 pH 8

MEM membrane concentration · 2

0 5 10 15 20 pH 4 pH 5 pH 6 pH 7 pH 8

HYD hydrated as supplied · 1

0 5 10 15 20 pH 4 pH 5 pH 6 pH 7 pH 8
Protein in the supernatant, after centrifugation (mg/mL) across pH · a panel per route, one line per ingredient; hover a line to see which

IPI isoelectric precipitation · 2

0 5 10 15 20 pH 4 pH 5 pH 6 pH 7 pH 8

MPI micellar isolation · 2

0 5 10 15 20 pH 4 pH 5 pH 6 pH 7 pH 8

MEM membrane concentration · 2

0 5 10 15 20 pH 4 pH 5 pH 6 pH 7 pH 8

HYD hydrated as supplied · 1

0 5 10 15 20 pH 4 pH 5 pH 6 pH 7 pH 8
Solubility (% of protein) across pH · a panel per route, one line per ingredient; hover a line to see which

IPI isoelectric precipitation · 2

0 20 40 60 80 100 pH 4 pH 5 pH 6 pH 7 pH 8

MPI micellar isolation · 2

0 20 40 60 80 100 pH 4 pH 5 pH 6 pH 7 pH 8

MEM membrane concentration · 2

0 20 40 60 80 100 pH 4 pH 5 pH 6 pH 7 pH 8

HYD hydrated as supplied · 1

0 20 40 60 80 100 pH 4 pH 5 pH 6 pH 7 pH 8

Readings above 100 % (the assay scatters near full solubility) are shown as 100 %; the downloadable files keep the values as measured.

Table: mean ± SD (n) per extract
MetricUnit Pea flour, IPIDG-0004-IPIPea flour, MPIDG-0004-MPIPea flour, MEMDG-0004-MEMPea concentrate, IPIDG-0006-IPIPea concentrate, MPIDG-0006-MPIPea concentrate, MEMDG-0006-MEMPea isolate, HYDDG-0011-HYD
Protein in the supernatant, after centrifugation, pH 4 mg/mL 0.0760 (n=1) 3.57 (n=1) 0.761 (n=1) 0.0895 (n=1) 8.83 (n=1) 0.128 (n=1) 0.0746 (n=1)
Protein in the supernatant, after centrifugation, pH 5 mg/mL 0.0886 (n=1) 0.0438 (n=1) 1.15 (n=1) 0.0756 (n=1) 0.0928 (n=1) 0.178 (n=1) 0.0563 (n=1)
Protein in the supernatant, after centrifugation, pH 6 mg/mL 1.67 (n=1) 2.36 (n=1) 2.36 (n=1) 1.47 (n=1) 0.111 (n=1) 7.66 (n=1) 0.609 (n=1)
Protein in the supernatant, after centrifugation, pH 7 mg/mL 8.42 (n=1) 8.18 (n=1) 15.1 (n=1) 6.31 (n=1) 8.60 (n=1) 6.73 (n=1) 0.850 (n=1)
Protein in the supernatant, after centrifugation, pH 8 mg/mL 8.73 (n=1) 8.22 (n=1) 14.6 (n=1) 8.37 (n=1) 9.97 (n=1) 6.71 (n=1) 0.925 (n=1)
Protein in the dispersion, before centrifugation, pH 4 mg/mL 7.98 (n=1) 9.50 (n=1) 17.9 (n=1) 9.61 (n=1) 10.9 (n=1) 9.21 (n=1) 9.01 (n=1)
Protein in the dispersion, before centrifugation, pH 5 mg/mL 8.81 (n=1) 11.1 (n=1) 18.6 (n=1) 9.71 (n=1) 11.7 (n=1) 9.10 (n=1) 9.96 (n=1)
Protein in the dispersion, before centrifugation, pH 6 mg/mL 8.71 (n=1) 11.8 (n=1) 18.9 (n=1) 10.5 (n=1) 12.3 (n=1) 9.78 (n=1) 8.93 (n=1)
Protein in the dispersion, before centrifugation, pH 7 mg/mL 8.76 (n=1) 11.3 (n=1) 18.0 (n=1) 9.30 (n=1) 13.6 (n=1) 11.6 (n=1) 9.15 (n=1)
Protein in the dispersion, before centrifugation, pH 8 mg/mL 8.83 (n=1) 10.4 (n=1) 18.4 (n=1) 8.41 (n=1) 11.9 (n=1) 11.2 (n=1) 9.96 (n=1)
Solubility, pH 4 % of protein 0.950 (n=1) 37.6 (n=1) 4.24 (n=1) 0.930 (n=1) 81.1 (n=1) 1.38 (n=1) 0.830 (n=1)
Solubility, pH 5 % of protein 1.01 (n=1) 0.390 (n=1) 6.22 (n=1) 0.778 (n=1) 0.792 (n=1) 1.96 (n=1) 0.570 (n=1)
Solubility, pH 6 % of protein 18.8 (n=1) 19.9 (n=1) 12.5 (n=1) 14.0 (n=1) 0.898 (n=1) 78.4 (n=1) 6.82 (n=1)
Solubility, pH 7 % of protein 96.1 (n=1) 72.5 (n=1) 84.2 (n=1) 67.9 (n=1) 63.2 (n=1) 58.0 (n=1) 9.29 (n=1)
Solubility, pH 8 % of protein 98.9 (n=1) 79.4 (n=1) 79.5 (n=1) 99.5 (n=1) 84.1 (n=1) 60.1 (n=1) 9.29 (n=1)

Caveats

  1. Weak signal: the membrane extract was a dilute liquid (about 10% protein), so the unfolding transition is very small and its temperature is uncertain by several degrees.Applies to DG-0004-MEM: Denaturation enthalpy, Denaturation onset temperature, Denaturation peak temperature.
  2. Measured under the earlier emulsion capacity method: 50% oil, homogenized at 10,000 rpm, centrifuged at 1000 rpm and 25 °C. From June 16, 2026 the method uses 60% oil, 10,500 rpm, 3000 rpm and 20 °C, so values from the two versions are not directly comparable.Applies to DG-0004-IPI, DG-0004-MEM, DG-0004-MPI, DG-0006-IPI, DG-0006-MEM, DG-0006-MPI: Emulsion capacity, Emulsion heat stability.