Ingredients · by function · release 2026.1

Solubility across pH

How much of the protein dissolves, and at which pH? Plotted for each published ingredient: 36 extracts of 16 ingredients. Add the ones that fit your product to the shortlist, then compare them on every assay. IPI, MPI and MEM are extracts the Data Garden made from each flour or concentrate; HYD is a hydrated isolate, measured using the same methods.

Filter by value

Measure

Protein
Moisture and ash
Solubility
Particle size
Denaturation
Emulsion capacity
Emulsion kinetics
Foam
Gel texture
at pH

An ingredient stays when at least one of its extracts meets every filter. Filters hide what fails; they never sort.

Solubility (% of protein) across pH · a panel per route, one line per ingredient; hover a line to see which

IPI isoelectric precipitation · 10

0 20 40 60 80 100 pH 4 pH 5 pH 6 pH 7 pH 8

MPI micellar isolation · 10

0 20 40 60 80 100 pH 4 pH 5 pH 6 pH 7 pH 8

MEM membrane concentration · 10

0 20 40 60 80 100 pH 4 pH 5 pH 6 pH 7 pH 8

HYD hydrated as supplied · 6

0 20 40 60 80 100 pH 4 pH 5 pH 6 pH 7 pH 8

Readings above 100 % (the assay scatters near full solubility) are shown as 100 %; the downloadable files keep the values as measured.

The readings behind solubility: protein in the dispersion before centrifugation and in the supernatant after it
Protein in the dispersion, before centrifugation (mg/mL) across pH · a panel per route, one line per ingredient; hover a line to see which

IPI isoelectric precipitation · 10

0 5 10 15 20 pH 4 pH 5 pH 6 pH 7 pH 8

MPI micellar isolation · 10

0 5 10 15 20 pH 4 pH 5 pH 6 pH 7 pH 8

MEM membrane concentration · 10

0 5 10 15 20 pH 4 pH 5 pH 6 pH 7 pH 8

HYD hydrated as supplied · 3

0 5 10 15 20 pH 4 pH 5 pH 6 pH 7 pH 8
Protein in the supernatant, after centrifugation (mg/mL) across pH · a panel per route, one line per ingredient; hover a line to see which

IPI isoelectric precipitation · 10

0 5 10 15 20 pH 4 pH 5 pH 6 pH 7 pH 8

MPI micellar isolation · 10

0 5 10 15 20 pH 4 pH 5 pH 6 pH 7 pH 8

MEM membrane concentration · 10

0 5 10 15 20 pH 4 pH 5 pH 6 pH 7 pH 8

HYD hydrated as supplied · 6

0 5 10 15 20 pH 4 pH 5 pH 6 pH 7 pH 8
Detail: Solubility at pH 7, every value, one row per ingredient, with your shortlist buttons

IPI, isoelectric precipitation MPI, micellar isolation MEM, membrane concentration HYD, hydrated as supplied Dot: extract mean; whisker: ± SD; dashed ring and small number: under the caveat of that number (listed below; hover for its text).

Ingredient Solubility, % of protein Means (% of protein) Shortlist
Faba Bean concentrate DG-0010 IPI 93.2MPI 53.31MEM 58.31
Faba Bean flour (DG-0007) DG-0007 IPI 90.2MPI 47.6MEM 42.7
Faba Bean flour (DG-0009) DG-0009 IPI 94.51MPI 1002MEM 97.21
Faba Bean isolate DG-0015 HYD 5.06
Hemp flour DG-0001 IPI 15.7MPI 11.1MEM 69.2
Lupin isolate DG-0016 HYD 11.8
Pea concentrate DG-0006 IPI 67.9MPI 63.2MEM 58.0
Pea flour DG-0004 IPI 96.1MPI 72.5MEM 84.2
Pea isolate DG-0011 HYD 9.29
Pumpkin flour DG-0002 IPI 34.9MPI 29.3MEM 63.4
Sesame flour DG-0008 IPI 21.0MPI 16.9MEM 8.25
Soybean flour DG-0005 IPI 91.2MPI 92.4MEM 82.4
Soybean isolate (DG-0012) DG-0012 HYD 27.9
Soybean isolate (DG-0013) DG-0013 HYD 14.6
Soybean isolate (DG-0014) DG-0014 HYD 18.0
Sunflower flour DG-0003 IPI 58.3MPI 30.5MEM 83.1
Detail: Protein in the dispersion, before centrifugation at pH 7, every value, one row per ingredient, with your shortlist buttons

IPI, isoelectric precipitation MPI, micellar isolation MEM, membrane concentration HYD, hydrated as supplied Dot: extract mean; whisker: ± SD; dashed ring and small number: under the caveat of that number (listed below; hover for its text).

Ingredient Protein in the dispersion, before centrifugation, mg/mL Means (mg/mL) Shortlist
Faba Bean concentrate DG-0010 IPI 14.2MPI 15.11MEM 13.51
Faba Bean flour (DG-0007) DG-0007 IPI 9.42MPI 9.19MEM 8.91
Faba Bean flour (DG-0009) DG-0009 IPI 10.61MPI 10.22MEM 11.11
Faba Bean isolate DG-0015 HYD 7.40
Hemp flour DG-0001 IPI 14.5MPI 13.5MEM 15.6
Lupin isolate DG-0016 Not measured.
Pea concentrate DG-0006 IPI 9.30MPI 13.6MEM 11.6
Pea flour DG-0004 IPI 8.76MPI 11.3MEM 18.0
Pea isolate DG-0011 HYD 9.15
Pumpkin flour DG-0002 IPI 14.6MPI 13.5MEM 13.0
Sesame flour DG-0008 IPI 13.5MPI 12.4MEM 14.8
Soybean flour DG-0005 IPI 7.15MPI 6.92MEM 7.01
Soybean isolate (DG-0012) DG-0012 Not measured.
Soybean isolate (DG-0013) DG-0013 Not measured.
Soybean isolate (DG-0014) DG-0014 HYD 7.48
Sunflower flour DG-0003 IPI 10.9MPI 6.95MEM 8.67
Detail: Protein in the supernatant, after centrifugation at pH 7, every value, one row per ingredient, with your shortlist buttons

IPI, isoelectric precipitation MPI, micellar isolation MEM, membrane concentration HYD, hydrated as supplied Dot: extract mean; whisker: ± SD; dashed ring and small number: under the caveat of that number (listed below; hover for its text).

Ingredient Protein in the supernatant, after centrifugation, mg/mL Means (mg/mL) Shortlist
Faba Bean concentrate DG-0010 IPI 13.2MPI 8.031MEM 7.881
Faba Bean flour (DG-0007) DG-0007 IPI 8.51MPI 4.38MEM 3.80
Faba Bean flour (DG-0009) DG-0009 IPI 10.01MPI 10.32MEM 10.81
Faba Bean isolate DG-0015 HYD 0.375
Hemp flour DG-0001 IPI 2.26MPI 1.49MEM 10.8
Lupin isolate DG-0016 HYD 0.712
Pea concentrate DG-0006 IPI 6.31MPI 8.60MEM 6.73
Pea flour DG-0004 IPI 8.42MPI 8.18MEM 15.1
Pea isolate DG-0011 HYD 0.850
Pumpkin flour DG-0002 IPI 5.09MPI 3.94MEM 8.26
Sesame flour DG-0008 IPI 2.83MPI 2.10MEM 1.22
Soybean flour DG-0005 IPI 6.51MPI 6.39MEM 5.77
Soybean isolate (DG-0012) DG-0012 HYD 2.27
Soybean isolate (DG-0013) DG-0013 HYD 1.23
Soybean isolate (DG-0014) DG-0014 HYD 1.35
Sunflower flour DG-0003 IPI 6.36MPI 2.12MEM 7.21

Caveats

  1. Measured while the solubility method was still being developed (April 2026). The plate readings were matched to samples and dilutions afterwards from lab records. Read these values with caution until the test is repeated.Applies to DG-0009-IPI, DG-0009-MEM, DG-0010-MEM, DG-0010-MPI: Protein in the dispersion, before centrifugation, Protein in the supernatant, after centrifugation, Solubility.
  2. Measured while the solubility method was still being developed (April 2026). The plate readings were matched to samples and dilutions afterwards from lab records. Read these values with caution until the test is repeated. Solubility of this sample does not align with other similar samples and should be re-confirmed.Applies to DG-0009-MPI: Protein in the dispersion, before centrifugation, Protein in the supernatant, after centrifugation, Solubility.

Method: Solubility (Bradford) v5.0, in the methods compendium.