Ingredients · By crop · release 2026.1

Pumpkin

Cucurbita spp.. 1 published ingredient: DG-0002 (flour).

DLS - Particle Size v5.0

How large are the particles the protein forms in water?

Particle size (% of intensity) by hydrodynamic diameter, intensity (as measured); all runs · a panel per route, one line per ingredient; hover a line to see which

IPI isoelectric precipitation · 1

0 2 4 6 8 10 nm 100 nm 1 µm

MPI micellar isolation · 1

0 2 4 6 8 10 nm 100 nm 1 µm

MEM membrane concentration · 1

0 2 4 6 8 10 nm 100 nm 1 µm
Particle size (hydrodynamic diameter); 0.1 M phosphate buffer pH 7, 0.1 % protein (nm) by ingredient and route
10 100 1,000 Pumpkin flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ×/÷ the geometric SD of the replicates (the spread on the log scale); dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order; log scale.

Polydispersity index; 0.1 M phosphate buffer pH 7, 0.1 % protein (%) by ingredient and route
20 22.5 25 27.5 30 Pumpkin flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

DSC - Differential Scanning Calorimetry v5.0

At what temperature does the protein denature, if at all?

Thermogram (W/g) heat flow per gram against temperature, baseline-corrected so curves overlay (a straight line through 45-50 °C and 113-118 °C subtracted); endothermic down · a panel per route, one line per ingredient; hover a line to see which

IPI isoelectric precipitation · 1

-0.03 -0.02 -0.01 0 0.01 45 °C 60 °C 75 °C 90 °C 105 °C

MPI micellar isolation · 1

-0.03 -0.02 -0.01 0 0.01 45 °C 60 °C 75 °C 90 °C 105 °C

MEM membrane concentration · 1

-0.03 -0.02 -0.01 0 0.01 45 °C 60 °C 75 °C 90 °C 105 °C

Pumpkin flour

Denaturation onset temperature (°C) by ingredient and route
70 75 80 85 90 Pumpkin flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Denaturation peak temperature (°C) by ingredient and route
85 90 95 100 Pumpkin flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Denaturation enthalpy (J/g) by ingredient and route
0 2 4 6 Pumpkin flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Denaturation enthalpy per gram of protein (J/g protein) by ingredient and route
0 5 10 15 20 Pumpkin flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Emulsion Capacity (Centrifugation) v5.1

How much of an oil and water mix does the protein turn into emulsion, and does it survive heating?

Emulsion layer, before heating (pale, behind) and after heating (% of height) by ingredient and route
40 42 44 46 48 Pumpkin flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Pale bar behind: emulsified layer before heating (measured, % of the column); solid bar: the layer after 30 min at 80 °C, derived as capacity × heat stability ÷ 100, replicate by replicate. Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Emulsion heat stability (% of layer) by ingredient and route
94 96 98 100 Pumpkin flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Emulsion Kinetics (Turbiscan) v5.0

How does an emulsion made with these proteins change over the course of an hour?

Emulsion stability over time (TSI) Turbiscan stability index against time; a higher index is a less stable emulsion · a panel per route, one line per ingredient; hover a line to see which

IPI isoelectric precipitation · 1

0 10 20 30 0 min 10 min 20 min 30 min 40 min 50 min

MPI micellar isolation · 1

0 10 20 30 0 min 10 min 20 min 30 min 40 min 50 min

MEM membrane concentration · 1

0 10 20 30 0 min 10 min 20 min 30 min 40 min 50 min

Pumpkin flour

Turbiscan Stability Index by ingredient and route
15 20 25 30 Pumpkin flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Creaming index (% of height) by ingredient and route
7.5 10 12.5 15 17.5 Pumpkin flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Foaming Capacity v5.0

How much foam does the protein make, and how much of it is left after 30 minutes?

Foam capacity (% of liquid height) by ingredient and route
125 127.5 130 132.5 135 137.5 Pumpkin flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Foam stability (% of initial foam) by ingredient and route
40 60 80 100 Pumpkin flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Foam height, initial (pale, behind) and final (mm) by ingredient and route
0 10 20 30 Pumpkin flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Pale bar behind: initial height; solid bar: final height. Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Foam capacity by foam stability a dot per extract
126 128 130 132 134 50 60 70 80 90 Foam capacity (% of liquid height) Foam stability (% of initial foam)

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Crosses: ± SD of each measure; dashed ring: under a caveat; bold outline: on your shortlist.

Gel Strength v5.0

How firm and springy a gel does the protein form when heated?

Texture profile (g) force against time over the two compressions · a panel per route, one line per ingredient; hover a line to see which

IPI isoelectric precipitation · 1

-50 0 50 100 150 0 s 2 s 4 s 6 s 8 s 10 s 12 s

MPI micellar isolation · 1

-50 0 50 100 150 0 s 2 s 4 s 6 s 8 s 10 s 12 s

MEM membrane concentration · 1

-50 0 50 100 150 0 s 2 s 4 s 6 s 8 s 10 s 12 s

Pumpkin flour

Gel hardness (g) by ingredient and route
0 50 100 150 Pumpkin flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Gel cohesiveness by ingredient and route
0.6 0.65 0.7 0.75 0.8 Pumpkin flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Gel springiness by ingredient and route
0 0.25 0.5 0.75 1 Pumpkin flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

LECO - Protein Content v3.0

How much protein is in the extract?

Protein, as is (% w/w) by ingredient and route
0 10 20 30 40 Pumpkin flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Protein, dry basis (% w/w dry basis) by ingredient and route
70 75 80 85 90 95 Pumpkin flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Nitrogen (% w/w) by ingredient and route
0 2 4 6 Pumpkin flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Nitrogen-to-protein factor by ingredient and route
4.5 4.75 5 5.25 5.5 Pumpkin flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Moisture/Ash Content v1.0

How much water and mineral (ash) does it carry?

Moisture (% w/w) by ingredient and route
50 60 70 80 90 Pumpkin flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Ash, dry basis (% w/w dry basis) by ingredient and route
0 1 2 3 4 Pumpkin flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Solubility (Bradford) v5.0

How much of the protein dissolves, and at which pH?

Protein in the dispersion, before centrifugation (mg/mL) across pH · a panel per route, one line per ingredient; hover a line to see which

IPI isoelectric precipitation · 1

0 5 10 15 20 pH 4 pH 5 pH 6 pH 7 pH 8

MPI micellar isolation · 1

0 5 10 15 20 pH 4 pH 5 pH 6 pH 7 pH 8

MEM membrane concentration · 1

0 5 10 15 20 pH 4 pH 5 pH 6 pH 7 pH 8
Protein in the supernatant, after centrifugation (mg/mL) across pH · a panel per route, one line per ingredient; hover a line to see which

IPI isoelectric precipitation · 1

0 5 10 15 pH 4 pH 5 pH 6 pH 7 pH 8

MPI micellar isolation · 1

0 5 10 15 pH 4 pH 5 pH 6 pH 7 pH 8

MEM membrane concentration · 1

0 5 10 15 pH 4 pH 5 pH 6 pH 7 pH 8
Solubility (% of protein) across pH · a panel per route, one line per ingredient; hover a line to see which

IPI isoelectric precipitation · 1

0 20 40 60 80 100 pH 4 pH 5 pH 6 pH 7 pH 8

MPI micellar isolation · 1

0 20 40 60 80 100 pH 4 pH 5 pH 6 pH 7 pH 8

MEM membrane concentration · 1

0 20 40 60 80 100 pH 4 pH 5 pH 6 pH 7 pH 8

Readings above 100 % (the assay scatters near full solubility) are shown as 100 %; the downloadable files keep the values as measured.

Detail: the range of extract means across every pumpkin extract, and how many extracts were measured
AssayMetricUnitLowestHighestExtracts
DLS Particle size (hydrodynamic diameter) nm 58.1 532 3
DLS Polydispersity index % 21.7 26.6 3
DSC Denaturation peak temperature °C 89.2 97.6 3
DSC Denaturation onset temperature °C 73.7 87.5 3
DSC Denaturation enthalpy J/g 0.590 4.22 3
DSC Denaturation enthalpy per gram of protein J/g protein 5.66 15.7 3
EC Emulsion capacity % of height 43.6 47.4 3
EC Emulsion heat stability % of layer 95.4 98.9 3
ES Creaming index % of height 8.97 16.6 3
ES Turbiscan Stability Index 1 18.8 28.5 3
FOAM Foam capacity % of liquid height 127 132 3
FOAM Foam height, final mm 3.63 6.94 3
FOAM Foam height, initial mm 6.88 8.05 3
FOAM Foam stability % of initial foam 53.4 86.4 3
GEL Gel cohesiveness 1 0.641 0.751 3
GEL Gel hardness g 7.02 110 3
GEL Gel springiness 1 0.196 0.795 3
LECO Nitrogen-to-protein factor 1 5.50 5.50 3
LECO Nitrogen % w/w 1.87 5.93 3
LECO Protein, as is % w/w 10.3 32.6 3
LECO Protein, dry basis % w/w dry basis 75.5 88.1 3
MASH Ash, dry basis % w/w dry basis 0.397 3.04 3
MASH Moisture % w/w 57.4 86.4 3
SOL Protein in the supernatant, after centrifugation, pH 4 mg/mL 0.921 14.1 3
SOL Protein in the supernatant, after centrifugation, pH 5 mg/mL 0.0917 2.91 3
SOL Protein in the supernatant, after centrifugation, pH 6 mg/mL 0.0859 1.38 3
SOL Protein in the supernatant, after centrifugation, pH 7 mg/mL 3.94 8.26 3
SOL Protein in the supernatant, after centrifugation, pH 8 mg/mL 9.01 14.1 3
SOL Protein in the dispersion, before centrifugation, pH 4 mg/mL 12.8 16.2 3
SOL Protein in the dispersion, before centrifugation, pH 5 mg/mL 12.4 15.0 3
SOL Protein in the dispersion, before centrifugation, pH 6 mg/mL 12.7 15.0 3
SOL Protein in the dispersion, before centrifugation, pH 7 mg/mL 13.0 14.6 3
SOL Protein in the dispersion, before centrifugation, pH 8 mg/mL 12.9 14.4 3
SOL Solubility, pH 4 % of protein 5.69 100 3
SOL Solubility, pH 5 % of protein 0.610 20.5 3
SOL Solubility, pH 6 % of protein 0.570 9.51 3
SOL Solubility, pH 7 % of protein 29.3 63.4 3
SOL Solubility, pH 8 % of protein 69.1 100 3