Ingredients · release 2026.1

DG-0007: Faba Bean flour

Vicia faba (NCBI taxon 3906). Protein 28.0% w/w as supplied (nitrogen factor 5.49, the factor in use when its dispersions were made; faba bean now uses 5.50).

The IPI, MPI and MEM results describe protein extracts the Data Garden made from this flour in its lab, one per route, not the flour as supplied. They show what its protein can do once extracted.

All Faba Bean

Extraction yields

ExtractRouteProtein recovered, % (isolated / input protein)Protein recovered, % (isolated / total input material)
DG-0007-IPI IPI isoelectric precipitation 71.4 ± 0.600 20.0
DG-0007-MPI MPI micellar isolation 43.3 ± 0.900 12.1
DG-0007-MEM MEM membrane concentration 55.8 ± 0.600 15.6
Photos of the extracts (2)

DG-0007-MPI micellar isolation

  • DG-0007-MPI: Solubility
    Solubility · 2026-05-26Tubes after the spin, one per pH. Solubility is the protein measured in the supernatant above the pellet (Bradford) against the dispersion before the spin, so a clear supernatant over a solid pellet reads low.

DG-0007-MEM membrane concentration

  • DG-0007-MEM: Solubility
    Solubility · 2026-05-26Tubes after the spin, one per pH. Solubility is the protein measured in the supernatant above the pellet (Bradford) against the dispersion before the spin, so a clear supernatant over a solid pellet reads low.

Photos from the lab, released under the dataset's license. Where marked color-corrected, the photo is adjusted so the four colored tapes and the background look the same in every photo, whatever the light; the photo as taken is linked beside it. Click a photo for the full image.

Protein bands (SDS-PAGE)

Which proteins make up the extract, and how large are they?

Protein entries: UniProt (CC BY 4.0). Structures: biological assemblies from the RCSB Protein Data Bank (Berman et al., 2000; CC0) where the protein has one of its own, otherwise the AlphaFold Protein Structure Database (Jumper et al., 2021; Varadi et al., 2024; CC BY 4.0). Each structure links to its entry. Copied 2026-10-27.

DLS - Particle Size v5.0

How large are the particles the protein forms in water? How it is measured

Particle size (% of intensity) by hydrodynamic diameter, intensity (as measured); all runs
0 5 10 15 10 nm 100 nm

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Hover a peak for its size and the run count.

Particle size (hydrodynamic diameter); 0.1 M phosphate buffer pH 7, 0.1 % protein (nm) by ingredient and route
100 1,000 Faba Bean flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ×/÷ the geometric SD of the replicates (the spread on the log scale); dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order; log scale.

Polydispersity index; 0.1 M phosphate buffer pH 7, 0.1 % protein (%) by ingredient and route
10 15 20 25 Faba Bean flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Mean ± SD (n replicates).

MetricUnitDG-0007-IPIDG-0007-MPIDG-0007-MEM
Particle size (hydrodynamic diameter) (0.1 M phosphate buffer pH 7, 0.05 % protein) nm 154 ± 9.94 (n=2)310 (n=1)189 ± 34.0 (n=4)
Particle size (hydrodynamic diameter) (0.1 M phosphate buffer pH 7, 0.1 % protein) nm 221 (n=1)280 ± 12.8 (n=2)221 ± 15.6 (n=2)
Particle size (hydrodynamic diameter) (water, 0.05 % protein) nm 229 (n=1)251 (n=1)187 (n=1)
Particle size (hydrodynamic diameter) (water, 0.1 % protein) nm 204 (n=1)278 ± 17.1 (n=2)191 ± 0.0547 (n=2)
Polydispersity index (0.1 M phosphate buffer pH 7, 0.05 % protein) % 21.8 ± 2.24 (n=2)9.24 (n=1)19.8 ± 5.09 (n=4)
Polydispersity index (0.1 M phosphate buffer pH 7, 0.1 % protein) % 19.1 (n=1)13.4 ± 5.12 (n=2)22.1 ± 0.584 (n=2)
Polydispersity index (water, 0.05 % protein) % 19.3 (n=1)14.4 (n=1)16.7 (n=1)
Polydispersity index (water, 0.1 % protein) % 25.2 (n=1)17.5 ± 1.92 (n=2)19.9 ± 0.373 (n=2)

DSC - Differential Scanning Calorimetry v5.0

At what temperature does the protein denature, if at all? How it is measured

Thermogram (W/g) heat flow per gram against temperature, baseline-corrected so curves overlay (a straight line through 45-50 °C and 113-118 °C subtracted); endothermic down
-0.03 -0.02 -0.01 0 0.01 45 °C 60 °C 75 °C 90 °C 105 °C

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; hover a point for its value.

Denaturation onset temperature (°C) by ingredient and route
74 76 78 80 82 Faba Bean flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Denaturation peak temperature (°C) by ingredient and route
84 86 88 90 92 Faba Bean flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Denaturation enthalpy (J/g) by ingredient and route
1.25 1.5 1.75 2 2.25 Faba Bean flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Denaturation enthalpy per gram of protein (J/g protein) by ingredient and route
5 6 7 8 9 10 Faba Bean flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Mean ± SD (n replicates).

MetricUnitDG-0007-IPIDG-0007-MPIDG-0007-MEM
Denaturation peak temperature °C 86.4 (n=1)89.0 (n=1)92.0 (n=1)
Denaturation onset temperature °C 76.5 (n=1)78.4 (n=1)81.7 (n=1)
Denaturation enthalpy J/g 1.93 (n=1)2.20 (n=1)1.44 (n=1)
Denaturation enthalpy per gram of protein J/g protein 6.47 (n=1)9.77 (n=1)8.23 (n=1)

Emulsion Capacity (Centrifugation) v5.1

How much of an oil and water mix does the protein turn into emulsion, and does it survive heating? How it is measured

Emulsion layer, before heating (pale, behind) and after heating (% of height) by ingredient and route
38 40 42 44 Faba Bean flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Pale bar behind: emulsified layer before heating (measured, % of the column); solid bar: the layer after 30 min at 80 °C, derived as capacity × heat stability ÷ 100, replicate by replicate. Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Emulsion heat stability (% of layer) by ingredient and route
90 92.5 95 97.5 100 Faba Bean flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Mean ± SD (n replicates).

MetricUnitDG-0007-IPIDG-0007-MPIDG-0007-MEM
Emulsion capacity % of height 41.7 ± 0.631 (n=3)140.8 ± 0.800 (n=3)142.7 ± 0.326 (n=3)1
Emulsion heat stability % of layer 96.4 ± 3.15 (n=3)197.5 ± 2.20 (n=3)192.3 ± 1.03 (n=3)1
  1. Measured under the earlier emulsion capacity method: 50% oil, homogenized at 10,000 rpm, centrifuged at 1000 rpm and 25 °C. From June 16, 2026 the method uses 60% oil, 10,500 rpm, 3000 rpm and 20 °C, so values from the two versions are not directly comparable.Applies to DG-0007-IPI, DG-0007-MEM, DG-0007-MPI: Emulsion capacity, Emulsion heat stability.

Emulsion Kinetics (Turbiscan) v5.0

How does an emulsion made with these proteins change over the course of an hour? How it is measured

Emulsion stability over time (TSI) Turbiscan stability index against time; a higher index is a less stable emulsion
0 5 10 15 20 0 min 10 min 20 min 30 min 40 min 50 min

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; hover a point for its value.

Turbiscan Stability Index by ingredient and route
16 18 20 22 Faba Bean flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Creaming index (% of height) by ingredient and route
5 10 15 20 25 Faba Bean flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Mean ± SD (n replicates).

MetricUnitDG-0007-IPIDG-0007-MPIDG-0007-MEM
Creaming index % of height 20.2 ± 1.18 (n=3)10.8 ± 1.06 (n=3)13.2 ± 0.610 (n=3)
Turbiscan Stability Index 1 17.0 ± 0.701 (n=3)19.5 ± 1.48 (n=3)19.3 ± 1.07 (n=3)

Foaming Capacity v5.0

How much foam does the protein make, and how much of it is left after 30 minutes? How it is measured

Foam capacity (% of liquid height) by ingredient and route
140 150 160 170 180 Faba Bean flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Foam stability (% of initial foam) by ingredient and route
70 75 80 85 Faba Bean flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Foam height, initial (pale, behind) and final (mm) by ingredient and route
0 10 20 30 Faba Bean flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Pale bar behind: initial height; solid bar: final height. Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Foam capacity by foam stability a dot per extract
140 150 160 170 72 74 76 78 80 82 Foam capacity (% of liquid height) Foam stability (% of initial foam)

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Crosses: ± SD of each measure; dashed ring: under a caveat; bold outline: on your shortlist.

Mean ± SD (n replicates).

MetricUnitDG-0007-IPIDG-0007-MPIDG-0007-MEM
Foam capacity % of liquid height 145 ± 2.06 (n=3)144 ± 2.33 (n=3)165 ± 9.94 (n=3)
Foam height, final mm 9.46 ± 0.417 (n=3)7.42 ± 0.346 (n=3)12.3 ± 1.33 (n=3)
Foam height, initial mm 11.8 ± 0.982 (n=3)10.1 ± 1.22 (n=3)16.2 ± 2.13 (n=3)
Foam stability % of initial foam 80.4 ± 3.11 (n=3)73.7 ± 5.64 (n=3)76.3 ± 3.84 (n=3)

Gel Strength v5.0

How firm and springy a gel does the protein form when heated? How it is measured

Texture profile (g) force against time over the two compressions
-20 0 20 40 60 0 s 2 s 4 s 6 s 8 s 10 s 12 s

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; hover a point for its value.

Gel hardness (g) by ingredient and route
0 20 40 60 80 Faba Bean flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Gel cohesiveness by ingredient and route
0.4 0.5 0.6 0.7 0.8 0.9 Faba Bean flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Gel springiness by ingredient and route
0 0.25 0.5 0.75 1 Faba Bean flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Mean ± SD (n replicates).

MetricUnitDG-0007-IPIDG-0007-MPIDG-0007-MEM
Gel cohesiveness 1 0.512 ± 0.0148 (n=4)0.799 ± 0.0227 (n=4)0.607 ± 0.0283 (n=4)
Gel hardness g 7.13 ± 1.40 (n=4)57.2 ± 7.00 (n=4)39.4 ± 1.37 (n=4)
Gel springiness 1 0.129 ± 0.110 (n=4)0.863 ± 0.00605 (n=4)0.768 ± 0.0122 (n=4)

LECO - Protein Content v3.0

How much protein is in the extract? How it is measured

Protein, as is (% w/w) by ingredient and route
15 20 25 30 35 Faba Bean flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Protein, dry basis (% w/w dry basis) by ingredient and route
78 80 82 84 86 Faba Bean flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Nitrogen (% w/w) by ingredient and route
2 3 4 5 6 Faba Bean flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Nitrogen-to-protein factor by ingredient and route
4.5 4.75 5 5.25 5.5 Faba Bean flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Mean ± SD (n replicates).

MetricUnitDG-0007-IPIDG-0007-MPIDG-0007-MEM
Nitrogen-to-protein factor 1 5.50 ± 0 (n=3)5.50 ± 0 (n=3)5.50 ± 0 (n=3)
Nitrogen % w/w 5.44 ± 0.0473 (n=3)4.09 ± 0.0896 (n=3)3.18 ± 0.0346 (n=3)
Protein, as is % w/w 29.9 ± 0.260 (n=3)22.5 ± 0.493 (n=3)17.5 ± 0.191 (n=3)
Protein, dry basis % w/w dry basis 84.0 ± 0.875 (n=3)81.8 ± 3.10 (n=3)80.3 ± 1.03 (n=3)

Moisture/Ash Content v1.0

How much water and mineral (ash) does it carry? How it is measured

Moisture (% w/w) by ingredient and route
60 65 70 75 80 Faba Bean flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Ash, dry basis (% w/w dry basis) by ingredient and route
0 2 4 6 Faba Bean flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Mean ± SD (n replicates).

MetricUnitDG-0007-IPIDG-0007-MPIDG-0007-MEM
Ash, dry basis % w/w dry basis 1.80 ± 0.270 (n=3)2.26 ± 0.396 (n=3)4.70 ± 0.520 (n=3)
Moisture % w/w 64.4 ± 0.204 (n=3)72.5 ± 0.852 (n=3)78.2 ± 0.145 (n=3)

Solubility (Bradford) v5.0

How much of the protein dissolves, and at which pH? How it is measured

Protein in the dispersion, before centrifugation (mg/mL) across pH
0 2 4 6 8 10 pH 4 pH 5 pH 6 pH 7 pH 8

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; hover a point for its value.

Protein in the supernatant, after centrifugation (mg/mL) across pH
0 2 4 6 8 10 pH 4 pH 5 pH 6 pH 7 pH 8

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; hover a point for its value.

Solubility (% of protein) across pH
0 20 40 60 80 100 pH 4 pH 5 pH 6 pH 7 pH 8

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; hover a point for its value.

Readings above 100 % (the assay scatters near full solubility) are shown as 100 %; the downloadable files keep the values as measured.

Mean ± SD (n replicates).

MetricUnitDG-0007-IPIDG-0007-MPIDG-0007-MEM
Protein in the supernatant, after centrifugation, pH 4 mg/mL 0.0239 (n=1)3.36 (n=1)0.292 (n=1)
Protein in the supernatant, after centrifugation, pH 5 mg/mL 0.0628 (n=1)0.0643 (n=1)0.261 (n=1)
Protein in the supernatant, after centrifugation, pH 6 mg/mL 5.05 (n=1)0.782 (n=1)0.730 (n=1)
Protein in the supernatant, after centrifugation, pH 7 mg/mL 8.51 (n=1)4.38 (n=1)3.80 (n=1)
Protein in the supernatant, after centrifugation, pH 8 mg/mL 8.78 (n=1)4.64 (n=1)4.00 (n=1)
Protein in the dispersion, before centrifugation, pH 4 mg/mL 8.96 (n=1)7.67 (n=1)8.09 (n=1)
Protein in the dispersion, before centrifugation, pH 5 mg/mL 8.84 (n=1)8.68 (n=1)8.28 (n=1)
Protein in the dispersion, before centrifugation, pH 6 mg/mL 8.98 (n=1)9.03 (n=1)8.58 (n=1)
Protein in the dispersion, before centrifugation, pH 7 mg/mL 9.42 (n=1)9.19 (n=1)8.91 (n=1)
Protein in the dispersion, before centrifugation, pH 8 mg/mL 8.59 (n=1)8.81 (n=1)7.72 (n=1)
Solubility, pH 4 % of protein 0.270 (n=1)43.8 (n=1)3.59 (n=1)
Solubility, pH 5 % of protein 0.710 (n=1)0.740 (n=1)3.15 (n=1)
Solubility, pH 6 % of protein 56.2 (n=1)8.66 (n=1)8.51 (n=1)
Solubility, pH 7 % of protein 90.2 (n=1)47.6 (n=1)42.7 (n=1)
Solubility, pH 8 % of protein 100 (n=1)52.6 (n=1)51.8 (n=1)

Every replicate is in the data API and in values.csv. Cite the release as Jones, V. P., Moore, I. V., & Westcott, D. (2026). Data Garden plant protein dataset (Version 2026.1) [Data set]. https://doi.org/10.5281/zenodo.23548545