Ingredients · release 2026.1
DG-0009: Faba Bean flour
Vicia faba (NCBI taxon 3906). Protein 26.1% w/w as supplied (nitrogen factor 5.40, the factor in use when its dispersions were made; faba bean now uses 5.50). Not every assay was run on this ingredient; the gaps are listed below.
The IPI, MPI and MEM results describe protein extracts the Data Garden made from this flour in its lab, one per route, not the flour as supplied. They show what its protein can do once extracted.
Extraction yields
| Extract | Route | Protein recovered, % (isolated / input protein) | Protein recovered, % (isolated / total input material) |
|---|---|---|---|
| DG-0009-IPI | IPI isoelectric precipitation | 65.6 | 17.2 |
| DG-0009-MPI | MPI micellar isolation | 43.0 | 11.2 |
| DG-0009-MEM | MEM membrane concentration | 68.3 | 17.9 |
Protein bands (SDS-PAGE)
Which proteins make up the extract, and how large are they?
Protein entries: UniProt (CC BY 4.0). Structures: biological assemblies from the RCSB Protein Data Bank (Berman et al., 2000; CC0) where the protein has one of its own, otherwise the AlphaFold Protein Structure Database (Jumper et al., 2021; Varadi et al., 2024; CC BY 4.0). Each structure links to its entry. Copied 2026-10-27.
DLS - Particle Size v5.0
How large are the particles the protein forms in water? How it is measured
IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Hover a peak for its size and the run count.
Mean ± SD (n replicates).
| Metric | Unit | DG-0009-IPI | DG-0009-MPI | DG-0009-MEM |
|---|---|---|---|---|
| Particle size (hydrodynamic diameter) (early measurement) | nm | 152 (n=1) | 245 (n=1) | 147 (n=1) |
| Polydispersity index (early measurement) | % | 27.0 (n=1) | 21.3 (n=1) | 28.4 (n=1) |
- Measured on the dispersion filtered at 0.45 um before the reading, as the method requires. This sample's early runs measured without filtering (April 2026) are withheld from the values and curves; the instrument workbook under raw/ still holds them.Applies to DG-0009-IPI, DG-0009-MEM, DG-0009-MPI: Particle size (hydrodynamic diameter), Polydispersity index.
DSC - Differential Scanning Calorimetry v5.0
At what temperature does the protein denature, if at all? How it is measured
IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; hover a point for its value.
IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.
IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.
IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.
IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.
Mean ± SD (n replicates).
| Metric | Unit | DG-0009-IPI | DG-0009-MPI | DG-0009-MEM |
|---|---|---|---|---|
| Denaturation peak temperature | °C | 86.7 (n=1) | 91.6 (n=1) | 91.3 (n=1) |
| Denaturation onset temperature | °C | 76.2 (n=1) | 82.5 (n=1) | 86.1 (n=1) |
| Denaturation enthalpy | J/g | 1.59 (n=1) | 3.79 (n=1) | 0.351 (n=1) |
| Denaturation enthalpy per gram of protein | J/g protein | 5.82 (n=1) | 13.1 (n=1) | 3.30 (n=1) |
Emulsion Kinetics (Turbiscan) v5.0
How does an emulsion made with these proteins change over the course of an hour? How it is measured
IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; hover a point for its value.
IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.
IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.
Mean ± SD (n replicates).
| Metric | Unit | DG-0009-IPI | DG-0009-MPI | DG-0009-MEM |
|---|---|---|---|---|
| Creaming index | % of height | 19.6 ± 1.01 (n=3)2 | 14.6 ± 6.70 (n=3)2 | 10.7 ± 1.11 (n=3)2 |
| Turbiscan Stability Index | 1 | 17.9 ± 0.535 (n=3)2 | 19.7 ± 1.19 (n=3)2 | 19.4 ± 0.301 (n=3)2 |
- Measured under an earlier emulsion stability procedure, with the homogenizer vial held by hand; the current method (version 5.0) holds the vial stationary in a stand. The oil load was not recorded. Not directly comparable with measurements made in the stand.Applies to DG-0009-IPI, DG-0009-MEM, DG-0009-MPI: Creaming index, Turbiscan Stability Index.
Foaming Capacity v5.0
How much foam does the protein make, and how much of it is left after 30 minutes? How it is measured
IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.
IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.
IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Pale bar behind: initial height; solid bar: final height. Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.
IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Crosses: ± SD of each measure; dashed ring: under a caveat; bold outline: on your shortlist.
Mean ± SD (n replicates).
| Metric | Unit | DG-0009-IPI | DG-0009-MPI | DG-0009-MEM |
|---|---|---|---|---|
| Foam capacity | % of liquid height | 154 ± 9.69 (n=3) | 143 ± 4.89 (n=3) | 166 ± 3.69 (n=3) |
| Foam height, final | mm | 10.8 ± 1.01 (n=3) | 6.56 ± 0.384 (n=3) | 13.0 ± 0.280 (n=3) |
| Foam height, initial | mm | 14.4 ± 2.97 (n=3) | 10.4 ± 1.46 (n=3) | 16.2 ± 0.974 (n=3) |
| Foam stability | % of initial foam | 76.3 ± 8.02 (n=3) | 63.7 ± 5.14 (n=3) | 80.4 ± 3.60 (n=3) |
Gel Strength v5.0
How firm and springy a gel does the protein form when heated? How it is measured
IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; hover a point for its value.
IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.
IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.
IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.
Mean ± SD (n replicates).
| Metric | Unit | DG-0009-IPI | DG-0009-MPI | DG-0009-MEM |
|---|---|---|---|---|
| Gel cohesiveness | 1 | 0.645 ± 0.0563 (n=4) | 0.831 ± 0.0591 (n=3) | 0.645 ± 0.0300 (n=5) |
| Gel hardness | g | 13.6 ± 0.612 (n=4) | 33.1 ± 2.62 (n=3) | 23.0 ± 3.22 (n=5) |
| Gel springiness | 1 | 0.537 ± 0.0184 (n=4) | 0.829 ± 0.0248 (n=3) | 0.684 ± 0.0462 (n=5) |
LECO - Protein Content v3.0
How much protein is in the extract? How it is measured
IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.
IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.
IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.
IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.
Mean ± SD (n replicates).
| Metric | Unit | DG-0009-IPI | DG-0009-MPI | DG-0009-MEM |
|---|---|---|---|---|
| Nitrogen-to-protein factor | 1 | 5.40 (n=1) | 5.40 (n=1) | 5.40 (n=1) |
| Nitrogen | % w/w | 5.04 ± 0.00849 (n=2) | 5.37 ± 0.00981 (n=3) | 1.97 ± 0.00778 (n=2) |
| Protein, as is | % w/w | 27.2 (n=1) | 29.0 (n=1) | 10.6 (n=1) |
| Protein, dry basis | % w/w dry basis | 81.2 (n=1) | 88.6 (n=1) | 79.9 (n=1) |
Moisture/Ash Content v1.0
How much water and mineral (ash) does it carry? How it is measured
IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.
MPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.
Mean ± SD (n replicates).
| Metric | Unit | DG-0009-IPI | DG-0009-MPI | DG-0009-MEM |
|---|---|---|---|---|
| Ash, dry basis | % w/w dry basis | 1.89 (n=1) | 8.92 ± 1.09 (n=3) | |
| Moisture | % w/w | 66.5 ± 0.235 (n=3) | 67.3 ± 0.804 (n=3) | 86.7 ± 0.0252 (n=3) |
Solubility (Bradford) v5.0
How much of the protein dissolves, and at which pH? How it is measured
IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; hover a point for its value.
IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; hover a point for its value.
IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; hover a point for its value.
Readings above 100 % (the assay scatters near full solubility) are shown as 100 %; the downloadable files keep the values as measured.
Mean ± SD (n replicates).
| Metric | Unit | DG-0009-IPI | DG-0009-MPI | DG-0009-MEM |
|---|---|---|---|---|
| Protein in the supernatant, after centrifugation, pH 4 | mg/mL | 0.117 (n=1)3 | 0.889 (n=1)4 | 0.316 (n=1)3 |
| Protein in the supernatant, after centrifugation, pH 5 | mg/mL | 0.524 (n=1)3 | 0.720 (n=1)4 | 0.857 (n=1)3 |
| Protein in the supernatant, after centrifugation, pH 6 | mg/mL | 7.34 (n=1)3 | 10.4 (n=1)4 | 10.7 (n=1)3 |
| Protein in the supernatant, after centrifugation, pH 7 | mg/mL | 10.0 (n=1)3 | 10.3 (n=1)4 | 10.8 (n=1)3 |
| Protein in the supernatant, after centrifugation, pH 8 | mg/mL | 10.7 (n=1)3 | 10.7 (n=1)4 | 10.9 (n=1)3 |
| Protein in the dispersion, before centrifugation, pH 4 | mg/mL | 8.58 (n=1)3 | 9.14 (n=1)4 | 8.36 (n=1)3 |
| Protein in the dispersion, before centrifugation, pH 5 | mg/mL | 9.80 (n=1)3 | 7.20 (n=1)4 | 9.23 (n=1)3 |
| Protein in the dispersion, before centrifugation, pH 6 | mg/mL | 9.87 (n=1)3 | 10.6 (n=1)4 | 10.2 (n=1)3 |
| Protein in the dispersion, before centrifugation, pH 7 | mg/mL | 10.6 (n=1)3 | 10.2 (n=1)4 | 11.1 (n=1)3 |
| Protein in the dispersion, before centrifugation, pH 8 | mg/mL | 11.2 (n=1)3 | 10.1 (n=1)4 | 10.3 (n=1)3 |
| Solubility, pH 4 | % of protein | 1.37 (n=1)3 | 9.73 (n=1)4 | 3.78 (n=1)3 |
| Solubility, pH 5 | % of protein | 5.35 (n=1)3 | 10.0 (n=1)4 | 9.27 (n=1)3 |
| Solubility, pH 6 | % of protein | 74.3 (n=1)3 | 98.1 (n=1)4 | 100 (n=1)3 |
| Solubility, pH 7 | % of protein | 94.5 (n=1)3 | 100 (n=1)4 | 97.2 (n=1)3 |
| Solubility, pH 8 | % of protein | 95.2 (n=1)3 | 100 (n=1)4 | 100 (n=1)3 |
- Measured while the solubility method was still being developed (April 2026). The plate readings were matched to samples and dilutions afterwards from lab records. Read these values with caution until the test is repeated.Applies to DG-0009-IPI, DG-0009-MEM: Protein in the dispersion, before centrifugation, Protein in the supernatant, after centrifugation, Solubility.
- Measured while the solubility method was still being developed (April 2026). The plate readings were matched to samples and dilutions afterwards from lab records. Read these values with caution until the test is repeated. Solubility of this sample does not align with other similar samples and should be re-confirmed.Applies to DG-0009-MPI: Protein in the dispersion, before centrifugation, Protein in the supernatant, after centrifugation, Solubility.
Not measured
| Extract | Assay | Reason |
|---|---|---|
| DG-0009-IPI | EC | Not measured: this ingredient was extracted in April 2026, before the emulsion method was settled. |
| DG-0009-MPI | EC | Not measured: this ingredient was extracted in April 2026, before the emulsion method was settled. |
| DG-0009-MEM | EC | Not measured: this ingredient was extracted in April 2026, before the emulsion method was settled. |
| DG-0009-IPI | MASH (ash) | Ash not reported: the sample did not ash completely, and it was not re-measured. |
Every replicate is in the data API and in values.csv. Cite the release as Jones, V. P., Moore, I. V., & Westcott, D. (2026). Data Garden plant protein dataset (Version 2026.1) [Data set]. https://doi.org/10.5281/zenodo.23548545