Compare · release 2026.1

Side-by-side comparison

Pick ingredients, the extraction routes and the assays to compare. Each column is one extract; each cell is mean ± SD over its replicates.

Ingredients
Routes
Assays (none checked: all)

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Dot: extract mean; whisker: ± SD; a small number marks a value under the caveat of that number (listed below; hover for its text).

DLS - Particle Size v5.0

How large are the particles the protein forms in water?

Particle size (% of intensity) by hydrodynamic diameter, intensity (as measured); all runs · a panel per route, one line per ingredient; hover a line to see which

IPI isoelectric precipitation · 1

0 2 4 6 10 nm 100 nm

MPI micellar isolation · 1

0 2 4 6 10 nm 100 nm

MEM membrane concentration · 1

0 2 4 6 10 nm 100 nm

HYD hydrated as supplied · 3

0 2 4 6 10 nm 100 nm
Particle size (hydrodynamic diameter); 0.1 M phosphate buffer pH 7, 0.1 % protein (nm) by ingredient and route
10 100 1,000 Soybean flour Soybean isolate #12 Soybean isolate #13 Soybean isolate #14

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ×/÷ the geometric SD of the replicates (the spread on the log scale); dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order; log scale.

Polydispersity index; 0.1 M phosphate buffer pH 7, 0.1 % protein (%) by ingredient and route
22 24 26 28 30 Soybean flour Soybean isolate #12 Soybean isolate #13 Soybean isolate #14

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Table: mean ± SD (n) per extract
MetricUnit Soybean flour, IPIDG-0005-IPISoybean flour, MPIDG-0005-MPISoybean flour, MEMDG-0005-MEMSoybean isolate (DG-0012), HYDDG-0012-HYDSoybean isolate (DG-0013), HYDDG-0013-HYDSoybean isolate (DG-0014), HYDDG-0014-HYD
Particle size (hydrodynamic diameter) nm 116 ± 5.95 (n=3) 73.5 ± 1.97 (n=3) 104 ± 12.8 (n=2) 98.7 ± 4.60 (n=2) 139 ± 35.5 (n=2) 104 ± 36.0 (n=2)
Polydispersity index % 27.4 ± 2.28 (n=3) 27.1 ± 1.62 (n=3) 28.0 ± 0.344 (n=2) 27.3 ± 1.40 (n=2) 23.8 ± 2.77 (n=2) 28.4 ± 1.38 (n=2)

DSC - Differential Scanning Calorimetry v5.0

At what temperature does the protein denature, if at all?

Thermogram (W/g) heat flow per gram against temperature, baseline-corrected so curves overlay (a straight line through 45-50 °C and 113-118 °C subtracted); endothermic down · a panel per route, one line per ingredient; hover a line to see which

IPI isoelectric precipitation · 1

-0.02 -0.015 -0.01 -0.005 0 0.005 45 °C 60 °C 75 °C 90 °C 105 °C

MPI micellar isolation · 1

-0.02 -0.015 -0.01 -0.005 0 0.005 45 °C 60 °C 75 °C 90 °C 105 °C

MEM membrane concentration · 1

-0.02 -0.015 -0.01 -0.005 0 0.005 45 °C 60 °C 75 °C 90 °C 105 °C

HYD hydrated as supplied · 2

-0.02 -0.015 -0.01 -0.005 0 0.005 45 °C 60 °C 75 °C 90 °C 105 °C

Soybean flourSoybean isolate (DG-0012)Soybean isolate (DG-0013)

Denaturation onset temperature (°C) by ingredient and route
86 88 90 92 94 Soybean flour Soybean isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Denaturation peak temperature (°C) by ingredient and route
92.5 95 97.5 100 102.5 Soybean flour Soybean isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Denaturation enthalpy (J/g) by ingredient and route
0 0.5 1 1.5 2 Soybean flour Soybean isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Denaturation enthalpy per gram of protein (J/g protein) by ingredient and route
0 5 10 15 Soybean flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Table: mean ± SD (n) per extract
MetricUnit Soybean flour, IPIDG-0005-IPISoybean flour, MPIDG-0005-MPISoybean flour, MEMDG-0005-MEMSoybean isolate (DG-0012), HYDDG-0012-HYDSoybean isolate (DG-0013), HYDDG-0013-HYDSoybean isolate (DG-0014), HYDDG-0014-HYD
Denaturation peak temperature °C 94.5 ± 0.303 (n=3) 94.5 ± 0.0451 (n=3) 95.1 (n=1) 102 (n=1) — —
Denaturation onset temperature °C 88.8 ± 0.191 (n=3) 87.2 ± 0.422 (n=3) 90.0 (n=1) 93.6 (n=1) — —
Denaturation enthalpy J/g 1.14 ± 0.0657 (n=3) 1.69 ± 0.0609 (n=3) 0.519 (n=1) 1.51 (n=1) — —
Denaturation enthalpy per gram of protein J/g protein 3.92 (n=3) 11.1 (n=3) 4.99 (n=1) — — —
Denaturation transition detected 1 — — — yes no —

Emulsion Capacity (Centrifugation) v5.1

How much of an oil and water mix does the protein turn into emulsion, and does it survive heating?

Emulsion layer, before heating (pale, behind) and after heating (% of height) by ingredient and route
42 44 46 48 50 Soybean flour Soybean isolate #12 Soybean isolate #13 Soybean isolate #14

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Pale bar behind: emulsified layer before heating (measured, % of the column); solid bar: the layer after 30 min at 80 °C, derived as capacity × heat stability ÷ 100, replicate by replicate. Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Emulsion heat stability (% of layer) by ingredient and route
98 99 100 101 Soybean flour Soybean isolate #12 Soybean isolate #13 Soybean isolate #14

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Table: mean ± SD (n) per extract
MetricUnit Soybean flour, IPIDG-0005-IPISoybean flour, MPIDG-0005-MPISoybean flour, MEMDG-0005-MEMSoybean isolate (DG-0012), HYDDG-0012-HYDSoybean isolate (DG-0013), HYDDG-0013-HYDSoybean isolate (DG-0014), HYDDG-0014-HYD
Emulsion capacity % of height 45.4 ± 0.795 (n=3) 48.6 ± 0.485 (n=3) 44.1 ± 4.17 (n=3) 45.7 ± 0.427 (n=3) 46.6 ± 0.918 (n=3) 46.0 ± 0 (n=3)
Emulsion heat stability % of layer 99.5 ± 0.947 (n=3) 98.8 ± 1.00 (n=3) 98.8 ± 1.01 (n=3) 100 ± 0 (n=3) 98.9 ± 1.92 (n=3) 100 ± 0 (n=3)

Emulsion Kinetics (Turbiscan) v5.0

How does an emulsion made with these proteins change over the course of an hour?

Emulsion stability over time (TSI) Turbiscan stability index against time; a higher index is a less stable emulsion · a panel per route, one line per ingredient; hover a line to see which

IPI isoelectric precipitation · 1

0 10 20 30 0 min 10 min 20 min 30 min 40 min 50 min

MPI micellar isolation · 1

0 10 20 30 0 min 10 min 20 min 30 min 40 min 50 min

MEM membrane concentration · 1

0 10 20 30 0 min 10 min 20 min 30 min 40 min 50 min

HYD hydrated as supplied · 1

0 10 20 30 0 min 10 min 20 min 30 min 40 min 50 min

Soybean flourSoybean isolate

Turbiscan Stability Index by ingredient and route
18 20 22 24 26 Soybean flour Soybean isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Creaming index (% of height) by ingredient and route
6 8 10 12 14 Soybean flour Soybean isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Table: mean ± SD (n) per extract
MetricUnit Soybean flour, IPIDG-0005-IPISoybean flour, MPIDG-0005-MPISoybean flour, MEMDG-0005-MEMSoybean isolate (DG-0012), HYDDG-0012-HYDSoybean isolate (DG-0013), HYDDG-0013-HYDSoybean isolate (DG-0014), HYDDG-0014-HYD
Creaming index % of height 10.2 ± 3.40 (n=3) 12.2 ± 0.566 (n=3) 11.0 ± 0.631 (n=3) 7.53 ± 0.750 (n=3) — —
Turbiscan Stability Index 1 21.4 ± 2.29 (n=3) 23.6 ± 0.833 (n=3) 18.9 ± 0.529 (n=3) 19.7 ± 0.165 (n=3) — —

Foaming Capacity v5.0

How much foam does the protein make, and how much of it is left after 30 minutes?

Foam capacity (% of liquid height) by ingredient and route
140 160 180 200 220 Soybean flour Soybean isolate #12 Soybean isolate #13 Soybean isolate #14

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Foam stability (% of initial foam) by ingredient and route
40 50 60 70 80 90 Soybean flour Soybean isolate #12 Soybean isolate #13 Soybean isolate #14

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Foam height, initial (pale, behind) and final (mm) by ingredient and route
0 10 20 30 Soybean flour Soybean isolate #12 Soybean isolate #13 Soybean isolate #14

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Pale bar behind: initial height; solid bar: final height. Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Foam capacity by foam stability a dot per extract
140 160 180 200 220 40 50 60 70 80 Foam capacity (% of liquid height) Foam stability (% of initial foam)

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Crosses: ± SD of each measure; dashed ring: under a caveat; bold outline: on your shortlist.

Table: mean ± SD (n) per extract
MetricUnit Soybean flour, IPIDG-0005-IPISoybean flour, MPIDG-0005-MPISoybean flour, MEMDG-0005-MEMSoybean isolate (DG-0012), HYDDG-0012-HYDSoybean isolate (DG-0013), HYDDG-0013-HYDSoybean isolate (DG-0014), HYDDG-0014-HYD
Foam capacity % of liquid height 181 ± 6.09 (n=3) 162 ± 7.97 (n=3) 198 ± 2.61 (n=3) 174 ± 5.50 (n=3) 171 ± 12.4 (n=3) 185 ± 7.09 (n=3)
Foam height, final mm 15.4 ± 0.312 (n=3) 12.6 ± 0.997 (n=3) 19.1 ± 1.09 (n=3) 13.4 ± 0.0404 (n=3) 12.7 ± 0.843 (n=3) 10.5 ± 0.465 (n=3)
Foam height, initial mm 24.4 ± 2.84 (n=3) 17.8 ± 1.73 (n=3) 25.3 ± 1.18 (n=3) 19.6 ± 2.22 (n=3) 17.8 ± 2.42 (n=3) 21.3 ± 2.34 (n=3)
Foam stability % of initial foam 63.6 ± 6.32 (n=3) 70.9 ± 5.31 (n=3) 75.6 ± 6.78 (n=3) 69.2 ± 7.88 (n=3) 72.0 ± 7.81 (n=3) 49.6 ± 7.11 (n=3)

Gel Strength v5.0

How firm and springy a gel does the protein form when heated?

Texture profile (g) force against time over the two compressions · a panel per route, one line per ingredient; hover a line to see which

IPI isoelectric precipitation · 1

0 5 10 15 20 0 s 2 s 4 s 6 s 8 s 10 s 12 s

MEM membrane concentration · 1

0 5 10 15 20 0 s 2 s 4 s 6 s 8 s 10 s 12 s

HYD hydrated as supplied · 2

0 5 10 15 20 0 s 2 s 4 s 6 s 8 s 10 s 12 s

Soybean flourSoybean isolate (DG-0012)Soybean isolate (DG-0014)

Gel hardness (g) by ingredient and route
0 20 40 60 Soybean flour Soybean isolate #12 Soybean isolate #14

IPI, isoelectric precipitationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Gel cohesiveness by ingredient and route
0.75 0.8 0.85 0.9 0.95 1 Soybean flour Soybean isolate #12 Soybean isolate #14

IPI, isoelectric precipitationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Gel springiness by ingredient and route
0.4 0.6 0.8 1 Soybean flour Soybean isolate #12 Soybean isolate #14

IPI, isoelectric precipitationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Table: mean ± SD (n) per extract
MetricUnit Soybean flour, IPIDG-0005-IPISoybean flour, MPIDG-0005-MPISoybean flour, MEMDG-0005-MEMSoybean isolate (DG-0012), HYDDG-0012-HYDSoybean isolate (DG-0013), HYDDG-0013-HYDSoybean isolate (DG-0014), HYDDG-0014-HYD
Gel cohesiveness 1 0.909 ± 0.0167 (n=6)1 — 0.804 ± 0.0983 (n=5)1 0.921 ± 0.0357 (n=7) — 0.823 ± 0.0464 (n=6)
Gel hardness g 12.2 ± 0.581 (n=6)1 — 9.70 ± 0.557 (n=5)1 7.63 ± 1.59 (n=10) — 27.5 ± 21.7 (n=8)
Gel springiness 1 0.771 ± 0.0456 (n=6)1 — 0.477 ± 0.155 (n=5)1 0.658 ± 0.0491 (n=7) — 0.813 ± 0.0201 (n=6)

LECO - Protein Content v3.0

How much protein is in the extract?

Protein, as is (% w/w) by ingredient and route
0 10 20 30 Soybean flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Protein, dry basis (% w/w dry basis) by ingredient and route
60 70 80 90 Soybean flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Nitrogen (% w/w) by ingredient and route
0 2 4 6 Soybean flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Nitrogen-to-protein factor by ingredient and route
4.5 4.75 5 5.25 5.5 Soybean flour Soybean isolate #12 Soybean isolate #13 Soybean isolate #14

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Table: mean ± SD (n) per extract
MetricUnit Soybean flour, IPIDG-0005-IPISoybean flour, MPIDG-0005-MPISoybean flour, MEMDG-0005-MEMSoybean isolate (DG-0012), HYDDG-0012-HYDSoybean isolate (DG-0013), HYDDG-0013-HYDSoybean isolate (DG-0014), HYDDG-0014-HYD
Nitrogen-to-protein factor 1 5.50 (n=1) 5.50 (n=1) 5.50 ± 0 (n=2) 5.50 (n=1) 5.50 (n=1) 5.50 (n=1)
Nitrogen % w/w 5.28 (n=1) 2.77 (n=1) 1.89 ± 0.113 (n=2) — — —
Protein, as is % w/w 29.0 (n=1) 15.2 (n=1) 10.4 ± 0.622 (n=2) — — —
Protein, dry basis % w/w dry basis 74.5 (n=1) 86.7 (n=1) 65.7 ± 3.94 (n=2) — — —

Moisture/Ash Content v1.0

How much water and mineral (ash) does it carry?

Moisture (% w/w) by ingredient and route
50 60 70 80 90 Soybean flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Ash, dry basis (% w/w dry basis) by ingredient and route
0 2 4 6 8 Soybean flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Table: mean ± SD (n) per extract
MetricUnit Soybean flour, IPIDG-0005-IPISoybean flour, MPIDG-0005-MPISoybean flour, MEMDG-0005-MEMSoybean isolate (DG-0012), HYDDG-0012-HYDSoybean isolate (DG-0013), HYDDG-0013-HYDSoybean isolate (DG-0014), HYDDG-0014-HYD
Ash, dry basis % w/w dry basis 0.433 ± 0.0551 (n=3) 0.670 ± 0.529 (n=3) 6.77 ± 0.108 (n=3) — — —
Moisture % w/w 61.0 ± 0.776 (n=3) 82.4 ± 0.0755 (n=3) 84.2 ± 0.0404 (n=3) — — —

Solubility (Bradford) v5.0

How much of the protein dissolves, and at which pH?

Protein in the dispersion, before centrifugation (mg/mL) across pH · a panel per route, one line per ingredient; hover a line to see which

IPI isoelectric precipitation · 1

0 2.5 5 7.5 10 12.5 pH 4 pH 5 pH 6 pH 7 pH 8

MPI micellar isolation · 1

0 2.5 5 7.5 10 12.5 pH 4 pH 5 pH 6 pH 7 pH 8

MEM membrane concentration · 1

0 2.5 5 7.5 10 12.5 pH 4 pH 5 pH 6 pH 7 pH 8

HYD hydrated as supplied · 1

0 2.5 5 7.5 10 12.5 pH 4 pH 5 pH 6 pH 7 pH 8
Protein in the supernatant, after centrifugation (mg/mL) across pH · a panel per route, one line per ingredient; hover a line to see which

IPI isoelectric precipitation · 1

0 2 4 6 8 pH 4 pH 5 pH 6 pH 7 pH 8

MPI micellar isolation · 1

0 2 4 6 8 pH 4 pH 5 pH 6 pH 7 pH 8

MEM membrane concentration · 1

0 2 4 6 8 pH 4 pH 5 pH 6 pH 7 pH 8

HYD hydrated as supplied · 3

0 2 4 6 8 pH 4 pH 5 pH 6 pH 7 pH 8
Solubility (% of protein) across pH · a panel per route, one line per ingredient; hover a line to see which

IPI isoelectric precipitation · 1

0 20 40 60 80 100 pH 4 pH 5 pH 6 pH 7 pH 8

MPI micellar isolation · 1

0 20 40 60 80 100 pH 4 pH 5 pH 6 pH 7 pH 8

MEM membrane concentration · 1

0 20 40 60 80 100 pH 4 pH 5 pH 6 pH 7 pH 8

HYD hydrated as supplied · 3

0 20 40 60 80 100 pH 4 pH 5 pH 6 pH 7 pH 8

Readings above 100 % (the assay scatters near full solubility) are shown as 100 %; the downloadable files keep the values as measured.

Table: mean ± SD (n) per extract
MetricUnit Soybean flour, IPIDG-0005-IPISoybean flour, MPIDG-0005-MPISoybean flour, MEMDG-0005-MEMSoybean isolate (DG-0012), HYDDG-0012-HYDSoybean isolate (DG-0013), HYDDG-0013-HYDSoybean isolate (DG-0014), HYDDG-0014-HYD
Protein in the supernatant, after centrifugation, pH 4 mg/mL 0.0919 (n=1) 4.28 (n=1) 0.182 (n=1) 0.0555 (n=1) 0.0546 (n=1) —
Protein in the supernatant, after centrifugation, pH 5 mg/mL 0.0641 (n=1) 0.0525 (n=1) 0.148 (n=1) 0.0418 (n=1) 0.0377 (n=1) —
Protein in the supernatant, after centrifugation, pH 6 mg/mL 1.06 (n=1) 0.0852 (n=1) 5.38 (n=1) 1.73 (n=1) 1.05 (n=1) 1.18 (n=1)
Protein in the supernatant, after centrifugation, pH 7 mg/mL 6.51 (n=1) 6.39 (n=1) 5.77 (n=1) 2.27 (n=1) 1.23 (n=1) 1.35 (n=1)
Protein in the supernatant, after centrifugation, pH 8 mg/mL 7.50 (n=1) 6.31 (n=1) 5.90 (n=1) 3.29 (n=1) 1.29 (n=1) 1.58 (n=1)
Protein in the dispersion, before centrifugation, pH 4 mg/mL 7.89 (n=1) 6.65 (n=1) 8.65 (n=1) — — 6.79 (n=1)
Protein in the dispersion, before centrifugation, pH 5 mg/mL 10.1 (n=1) 6.92 (n=1) 8.29 (n=1) — — 7.00 (n=1)
Protein in the dispersion, before centrifugation, pH 6 mg/mL 5.90 (n=1) 6.84 (n=1) 6.80 (n=1) — — 7.56 (n=1)
Protein in the dispersion, before centrifugation, pH 7 mg/mL 7.15 (n=1) 6.92 (n=1) 7.01 (n=1) — — 7.48 (n=1)
Protein in the dispersion, before centrifugation, pH 8 mg/mL 9.14 (n=1) 7.57 (n=1) 7.18 (n=1) — — 6.92 (n=1)
Solubility, pH 4 % of protein 1.16 (n=1) 64.3 (n=1) 2.12 (n=1) 0.820 (n=1) 0.860 (n=1) —
Solubility, pH 5 % of protein 0.640 (n=1) 0.760 (n=1) 1.79 (n=1) 0.630 (n=1) 0.520 (n=1) —
Solubility, pH 6 % of protein 18.0 (n=1) 1.25 (n=1) 79.2 (n=1) 19.7 (n=1) 18.8 (n=1) 15.6 (n=1)
Solubility, pH 7 % of protein 91.2 (n=1) 92.4 (n=1) 82.4 (n=1) 27.9 (n=1) 14.6 (n=1) 18.0 (n=1)
Solubility, pH 8 % of protein 82.0 (n=1) 83.4 (n=1) 82.2 (n=1) 42.6 (n=1) 18.5 (n=1) 22.9 (n=1)

Caveats

  1. The gels were heated at about 80 °C instead of the method's 90 °C: the water bath cooled after the samples went in. These proteins unfold at about 94 °C, so gel firmness is likely understated, and the micellar extract did not form a gel.Applies to DG-0005-IPI, DG-0005-MEM: Gel cohesiveness, Gel hardness, Gel springiness.

Not measured

ExtractAssayReason
DG-0005-MPIGELNo gel formed: the dispersions were heated at about 80 °C, short of the method's 90 °C, and did not set, so there was nothing to measure.
DG-0013-HYDGELNo gel formed: the hydrated soy isolate (dispersion type) stayed a pourable, silvery white liquid after the 90 °C water bath, with a slimy white rim, so no texture measurement was taken.