Compare · release 2026.1

Side-by-side comparison

Pick ingredients, the extraction routes and the assays to compare. Each column is one extract; each cell is mean ± SD over its replicates.

Ingredients
Routes
Assays (none checked: all)

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Dot: extract mean; whisker: ± SD; a small number marks a value under the caveat of that number (listed below; hover for its text).

DLS - Particle Size v5.0

How large are the particles the protein forms in water?

Particle size (% of intensity) by hydrodynamic diameter, intensity (as measured); all runs · a panel per route, one line per ingredient; hover a line to see which

IPI isoelectric precipitation · 3

0 5 10 15 10 nm 100 nm 1 µm

MPI micellar isolation · 3

0 5 10 15 10 nm 100 nm 1 µm

MEM membrane concentration · 3

0 5 10 15 10 nm 100 nm 1 µm

HYD hydrated as supplied · 1

0 5 10 15 10 nm 100 nm 1 µm
Particle size (hydrodynamic diameter); 0.1 M phosphate buffer pH 7, 0.1 % protein (nm) by ingredient and route
100 1,000 Faba Bean flour Faba Bean isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ×/÷ the geometric SD of the replicates (the spread on the log scale); dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order; log scale.

Polydispersity index; 0.1 M phosphate buffer pH 7, 0.1 % protein (%) by ingredient and route
10 15 20 25 30 Faba Bean flour Faba Bean isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Table: mean ± SD (n) per extract

DSC - Differential Scanning Calorimetry v5.0

At what temperature does the protein denature, if at all?

Thermogram (W/g) heat flow per gram against temperature, baseline-corrected so curves overlay (a straight line through 45-50 °C and 113-118 °C subtracted); endothermic down · a panel per route, one line per ingredient; hover a line to see which

IPI isoelectric precipitation · 3

-0.04 -0.03 -0.02 -0.01 0 0.01 45 °C 60 °C 75 °C 90 °C 105 °C

MPI micellar isolation · 3

-0.04 -0.03 -0.02 -0.01 0 0.01 45 °C 60 °C 75 °C 90 °C 105 °C

MEM membrane concentration · 3

-0.04 -0.03 -0.02 -0.01 0 0.01 45 °C 60 °C 75 °C 90 °C 105 °C

HYD hydrated as supplied · 1

-0.04 -0.03 -0.02 -0.01 0 0.01 45 °C 60 °C 75 °C 90 °C 105 °C

Faba Bean concentrateFaba Bean flour (DG-0007)Faba Bean flour (DG-0009)Faba Bean isolate

Denaturation onset temperature (°C) by ingredient and route
70 75 80 85 90 Faba Bean concentrate Faba Bean flour #07 Faba Bean flour #09 Faba Bean isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Denaturation peak temperature (°C) by ingredient and route
85 87.5 90 92.5 95 Faba Bean concentrate Faba Bean flour #07 Faba Bean flour #09 Faba Bean isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Denaturation enthalpy (J/g) by ingredient and route
0 1 2 3 4 Faba Bean concentrate Faba Bean flour #07 Faba Bean flour #09 Faba Bean isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Denaturation enthalpy per gram of protein (J/g protein) by ingredient and route
0 5 10 15 Faba Bean concentrate Faba Bean flour #07 Faba Bean flour #09

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Table: mean ± SD (n) per extract
MetricUnit Faba Bean flour (DG-0007), IPIDG-0007-IPIFaba Bean flour (DG-0007), MPIDG-0007-MPIFaba Bean flour (DG-0007), MEMDG-0007-MEMFaba Bean flour (DG-0009), IPIDG-0009-IPIFaba Bean flour (DG-0009), MPIDG-0009-MPIFaba Bean flour (DG-0009), MEMDG-0009-MEMFaba Bean concentrate, IPIDG-0010-IPIFaba Bean concentrate, MPIDG-0010-MPIFaba Bean concentrate, MEMDG-0010-MEMFaba Bean isolate, HYDDG-0015-HYD
Denaturation peak temperature °C 86.4 (n=1) 89.0 (n=1) 92.0 (n=1) 86.7 (n=1) 91.6 (n=1) 91.3 (n=1) 86.1 ± 0.658 (n=2) 89.2 ± 0.202 (n=3) 93.6 ± 0.260 (n=3) 91.5 (n=1)2
Denaturation onset temperature °C 76.5 (n=1) 78.4 (n=1) 81.7 (n=1) 76.2 (n=1) 82.5 (n=1) 86.1 (n=1) 75.9 ± 1.72 (n=2) 78.4 ± 0.102 (n=3) 79.8 ± 0.630 (n=3) 78.6 (n=1)2
Denaturation enthalpy J/g 1.93 (n=1) 2.20 (n=1) 1.44 (n=1) 1.59 (n=1) 3.79 (n=1) 0.351 (n=1) 1.96 ± 0.332 (n=2) 2.89 ± 0.0610 (n=3) 1.23 ± 0.0637 (n=3) 0.157 (n=1)2
Denaturation enthalpy per gram of protein J/g protein 6.47 (n=1) 9.77 (n=1) 8.23 (n=1) 5.82 (n=1) 13.1 (n=1) 3.30 (n=1) 6.26 (n=2) 13.4 (n=3) 10.3 (n=3) —

Emulsion Capacity (Centrifugation) v5.1

How much of an oil and water mix does the protein turn into emulsion, and does it survive heating?

Emulsion layer, before heating (pale, behind) and after heating (% of height) by ingredient and route
36 38 40 42 44 Faba Bean concentrate Faba Bean flour Faba Bean isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Pale bar behind: emulsified layer before heating (measured, % of the column); solid bar: the layer after 30 min at 80 °C, derived as capacity × heat stability ÷ 100, replicate by replicate. Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Emulsion heat stability (% of layer) by ingredient and route
85 90 95 100 Faba Bean concentrate Faba Bean flour Faba Bean isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Table: mean ± SD (n) per extract
MetricUnit Faba Bean flour (DG-0007), IPIDG-0007-IPIFaba Bean flour (DG-0007), MPIDG-0007-MPIFaba Bean flour (DG-0007), MEMDG-0007-MEMFaba Bean flour (DG-0009), IPIDG-0009-IPIFaba Bean flour (DG-0009), MPIDG-0009-MPIFaba Bean flour (DG-0009), MEMDG-0009-MEMFaba Bean concentrate, IPIDG-0010-IPIFaba Bean concentrate, MPIDG-0010-MPIFaba Bean concentrate, MEMDG-0010-MEMFaba Bean isolate, HYDDG-0015-HYD
Emulsion capacity % of height 41.7 ± 0.631 (n=3)3 40.8 ± 0.800 (n=3)3 42.7 ± 0.326 (n=3)3 — — — 40.9 ± 0.451 (n=3)4 — — 43.1 ± 0 (n=3)
Emulsion heat stability % of layer 96.4 ± 3.15 (n=3)3 97.5 ± 2.20 (n=3)3 92.3 ± 1.03 (n=3)3 — — — 91.1 ± 3.86 (n=3)4 — — 88.1 ± 4.13 (n=3)

Emulsion Kinetics (Turbiscan) v5.0

How does an emulsion made with these proteins change over the course of an hour?

Emulsion stability over time (TSI) Turbiscan stability index against time; a higher index is a less stable emulsion · a panel per route, one line per ingredient; hover a line to see which

IPI isoelectric precipitation · 3

0 5 10 15 20 0 min 10 min 20 min 30 min 40 min 50 min

MPI micellar isolation · 3

0 5 10 15 20 0 min 10 min 20 min 30 min 40 min 50 min

MEM membrane concentration · 3

0 5 10 15 20 0 min 10 min 20 min 30 min 40 min 50 min

HYD hydrated as supplied · 1

0 5 10 15 20 0 min 10 min 20 min 30 min 40 min 50 min

Faba Bean concentrateFaba Bean flour (DG-0007)Faba Bean flour (DG-0009)Faba Bean isolate

Turbiscan Stability Index by ingredient and route
14 16 18 20 22 Faba Bean concentrate Faba Bean flour #07 Faba Bean flour #09 Faba Bean isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Creaming index (% of height) by ingredient and route
0 10 20 30 Faba Bean concentrate Faba Bean flour #07 Faba Bean flour #09 Faba Bean isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Table: mean ± SD (n) per extract
MetricUnit Faba Bean flour (DG-0007), IPIDG-0007-IPIFaba Bean flour (DG-0007), MPIDG-0007-MPIFaba Bean flour (DG-0007), MEMDG-0007-MEMFaba Bean flour (DG-0009), IPIDG-0009-IPIFaba Bean flour (DG-0009), MPIDG-0009-MPIFaba Bean flour (DG-0009), MEMDG-0009-MEMFaba Bean concentrate, IPIDG-0010-IPIFaba Bean concentrate, MPIDG-0010-MPIFaba Bean concentrate, MEMDG-0010-MEMFaba Bean isolate, HYDDG-0015-HYD
Creaming index % of height 20.2 ± 1.18 (n=3) 10.8 ± 1.06 (n=3) 13.2 ± 0.610 (n=3) 19.6 ± 1.01 (n=3)5 14.6 ± 6.70 (n=3)5 10.7 ± 1.11 (n=3)5 16.9 ± 1.27 (n=3)5 9.24 ± 1.68 (n=3)5 19.2 ± 0.973 (n=3)5 7.48 ± 0.977 (n=3)
Turbiscan Stability Index 1 17.0 ± 0.701 (n=3) 19.5 ± 1.48 (n=3) 19.3 ± 1.07 (n=3) 17.9 ± 0.535 (n=3)5 19.7 ± 1.19 (n=3)5 19.4 ± 0.301 (n=3)5 15.8 ± 1.07 (n=3)5 17.4 ± 2.04 (n=3)5 16.7 ± 0.585 (n=3)5 18.7 ± 0.797 (n=3)

Foaming Capacity v5.0

How much foam does the protein make, and how much of it is left after 30 minutes?

Foam capacity (% of liquid height) by ingredient and route
120 140 160 180 200 Faba Bean concentrate Faba Bean flour #07 Faba Bean flour #09 Faba Bean isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Foam stability (% of initial foam) by ingredient and route
60 70 80 90 Faba Bean concentrate Faba Bean flour #07 Faba Bean flour #09 Faba Bean isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Foam height, initial (pale, behind) and final (mm) by ingredient and route
0 10 20 30 Faba Bean concentrate Faba Bean flour #07 Faba Bean flour #09 Faba Bean isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Pale bar behind: initial height; solid bar: final height. Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Foam capacity by foam stability a dot per extract
120 140 160 180 200 60 65 70 75 80 85 Foam capacity (% of liquid height) Foam stability (% of initial foam)

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Crosses: ± SD of each measure; dashed ring: under a caveat; bold outline: on your shortlist.

Table: mean ± SD (n) per extract
MetricUnit Faba Bean flour (DG-0007), IPIDG-0007-IPIFaba Bean flour (DG-0007), MPIDG-0007-MPIFaba Bean flour (DG-0007), MEMDG-0007-MEMFaba Bean flour (DG-0009), IPIDG-0009-IPIFaba Bean flour (DG-0009), MPIDG-0009-MPIFaba Bean flour (DG-0009), MEMDG-0009-MEMFaba Bean concentrate, IPIDG-0010-IPIFaba Bean concentrate, MPIDG-0010-MPIFaba Bean concentrate, MEMDG-0010-MEMFaba Bean isolate, HYDDG-0015-HYD
Foam capacity % of liquid height 145 ± 2.06 (n=3) 144 ± 2.33 (n=3) 165 ± 9.94 (n=3) 154 ± 9.69 (n=3) 143 ± 4.89 (n=3) 166 ± 3.69 (n=3) 146 ± 1.94 (n=3) 140 ± 7.04 (n=3) 178 ± 4.55 (n=3) 138 ± 0.520 (n=3)
Foam height, final mm 9.46 ± 0.417 (n=3) 7.42 ± 0.346 (n=3) 12.3 ± 1.33 (n=3) 10.8 ± 1.01 (n=3) 6.56 ± 0.384 (n=3) 13.0 ± 0.280 (n=3) 8.87 ± 0.605 (n=3) 6.85 ± 0.694 (n=3) 15.7 ± 0.988 (n=3) 6.74 ± 0.00577 (n=3)
Foam height, initial mm 11.8 ± 0.982 (n=3) 10.1 ± 1.22 (n=3) 16.2 ± 2.13 (n=3) 14.4 ± 2.97 (n=3) 10.4 ± 1.46 (n=3) 16.2 ± 0.974 (n=3) 12.1 ± 1.88 (n=3) 9.28 ± 1.36 (n=3) 21.2 ± 1.54 (n=3) 9.00 ± 0.393 (n=3)
Foam stability % of initial foam 80.4 ± 3.11 (n=3) 73.7 ± 5.64 (n=3) 76.3 ± 3.84 (n=3) 76.3 ± 8.02 (n=3) 63.7 ± 5.14 (n=3) 80.4 ± 3.60 (n=3) 74.1 ± 8.87 (n=3) 74.2 ± 3.88 (n=3) 74.4 ± 2.07 (n=3) 75.0 ± 3.35 (n=3)

Gel Strength v5.0

How firm and springy a gel does the protein form when heated?

Texture profile (g) force against time over the two compressions · a panel per route, one line per ingredient; hover a line to see which

IPI isoelectric precipitation · 2

-25 0 25 50 75 0 s 2 s 4 s 6 s 8 s 10 s 12 s

MPI micellar isolation · 3

-25 0 25 50 75 0 s 2 s 4 s 6 s 8 s 10 s 12 s

MEM membrane concentration · 3

-25 0 25 50 75 0 s 2 s 4 s 6 s 8 s 10 s 12 s

HYD hydrated as supplied · 1

-25 0 25 50 75 0 s 2 s 4 s 6 s 8 s 10 s 12 s

Faba Bean concentrateFaba Bean flour (DG-0007)Faba Bean flour (DG-0009)Faba Bean isolate

Gel hardness (g) by ingredient and route
0 20 40 60 80 Faba Bean concentrate Faba Bean flour #07 Faba Bean flour #09 Faba Bean isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Gel cohesiveness by ingredient and route
0.4 0.6 0.8 1 Faba Bean concentrate Faba Bean flour #07 Faba Bean flour #09 Faba Bean isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Gel springiness by ingredient and route
0 0.25 0.5 0.75 1 Faba Bean concentrate Faba Bean flour #07 Faba Bean flour #09 Faba Bean isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Table: mean ± SD (n) per extract
MetricUnit Faba Bean flour (DG-0007), IPIDG-0007-IPIFaba Bean flour (DG-0007), MPIDG-0007-MPIFaba Bean flour (DG-0007), MEMDG-0007-MEMFaba Bean flour (DG-0009), IPIDG-0009-IPIFaba Bean flour (DG-0009), MPIDG-0009-MPIFaba Bean flour (DG-0009), MEMDG-0009-MEMFaba Bean concentrate, IPIDG-0010-IPIFaba Bean concentrate, MPIDG-0010-MPIFaba Bean concentrate, MEMDG-0010-MEMFaba Bean isolate, HYDDG-0015-HYD
Gel cohesiveness 1 0.512 ± 0.0148 (n=4) 0.799 ± 0.0227 (n=4) 0.607 ± 0.0283 (n=4) 0.645 ± 0.0563 (n=4) 0.831 ± 0.0591 (n=3) 0.645 ± 0.0300 (n=5) — 0.773 ± 0.0228 (n=4) 0.605 ± 0.00240 (n=2) 0.615 ± 0.0209 (n=6)
Gel hardness g 7.13 ± 1.40 (n=4) 57.2 ± 7.00 (n=4) 39.4 ± 1.37 (n=4) 13.6 ± 0.612 (n=4) 33.1 ± 2.62 (n=3) 23.0 ± 3.22 (n=5) — 50.2 ± 5.76 (n=4) 33.4 ± 0.888 (n=2) 73.6 ± 4.95 (n=6)
Gel springiness 1 0.129 ± 0.110 (n=4) 0.863 ± 0.00605 (n=4) 0.768 ± 0.0122 (n=4) 0.537 ± 0.0184 (n=4) 0.829 ± 0.0248 (n=3) 0.684 ± 0.0462 (n=5) — 0.852 ± 0.0197 (n=4) 0.731 ± 0.00339 (n=2) 0.832 ± 0.0112 (n=6)

LECO - Protein Content v3.0

How much protein is in the extract?

Protein, as is (% w/w) by ingredient and route
0 10 20 30 40 Faba Bean concentrate Faba Bean flour #07 Faba Bean flour #09

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Protein, dry basis (% w/w dry basis) by ingredient and route
75 80 85 90 95 Faba Bean concentrate Faba Bean flour #07 Faba Bean flour #09

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Nitrogen (% w/w) by ingredient and route
0 2 4 6 Faba Bean concentrate Faba Bean flour #07 Faba Bean flour #09

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Nitrogen-to-protein factor by ingredient and route
5.35 5.4 5.45 5.5 Faba Bean concentrate Faba Bean flour #07 Faba Bean flour #09 Faba Bean isolate

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Table: mean ± SD (n) per extract
MetricUnit Faba Bean flour (DG-0007), IPIDG-0007-IPIFaba Bean flour (DG-0007), MPIDG-0007-MPIFaba Bean flour (DG-0007), MEMDG-0007-MEMFaba Bean flour (DG-0009), IPIDG-0009-IPIFaba Bean flour (DG-0009), MPIDG-0009-MPIFaba Bean flour (DG-0009), MEMDG-0009-MEMFaba Bean concentrate, IPIDG-0010-IPIFaba Bean concentrate, MPIDG-0010-MPIFaba Bean concentrate, MEMDG-0010-MEMFaba Bean isolate, HYDDG-0015-HYD
Nitrogen-to-protein factor 1 5.50 ± 0 (n=3) 5.50 ± 0 (n=3) 5.50 ± 0 (n=3) 5.40 (n=1) 5.40 (n=1) 5.40 (n=1) 5.40 ± 0 (n=4) 5.40 ± 0 (n=4) 5.40 ± 0 (n=4) 5.50 (n=1)
Nitrogen % w/w 5.44 ± 0.0473 (n=3) 4.09 ± 0.0896 (n=3) 3.18 ± 0.0346 (n=3) 5.04 ± 0.00849 (n=2) 5.37 ± 0.00981 (n=3) 1.97 ± 0.00778 (n=2) 5.79 ± 0.0670 (n=5) 3.99 ± 0.0357 (n=5) 2.20 ± 0.00471 (n=5) —
Protein, as is % w/w 29.9 ± 0.260 (n=3) 22.5 ± 0.493 (n=3) 17.5 ± 0.191 (n=3) 27.2 (n=1) 29.0 (n=1) 10.6 (n=1) 31.3 ± 0.403 (n=4) 21.6 ± 0.210 (n=4) 11.9 ± 0.0287 (n=4) —
Protein, dry basis % w/w dry basis 84.0 ± 0.875 (n=3) 81.8 ± 3.10 (n=3) 80.3 ± 1.03 (n=3) 81.2 (n=1) 88.6 (n=1) 79.9 (n=1) 81.4 ± 1.30 (n=4) 81.0 ± 1.44 (n=2) — —

Moisture/Ash Content v1.0

How much water and mineral (ash) does it carry?

Moisture (% w/w) by ingredient and route
50 60 70 80 90 Faba Bean concentrate Faba Bean flour #07 Faba Bean flour #09

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Ash, dry basis (% w/w dry basis) by ingredient and route
0 5 10 15 Faba Bean concentrate Faba Bean flour #07 Faba Bean flour #09

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentration Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Table: mean ± SD (n) per extract
MetricUnit Faba Bean flour (DG-0007), IPIDG-0007-IPIFaba Bean flour (DG-0007), MPIDG-0007-MPIFaba Bean flour (DG-0007), MEMDG-0007-MEMFaba Bean flour (DG-0009), IPIDG-0009-IPIFaba Bean flour (DG-0009), MPIDG-0009-MPIFaba Bean flour (DG-0009), MEMDG-0009-MEMFaba Bean concentrate, IPIDG-0010-IPIFaba Bean concentrate, MPIDG-0010-MPIFaba Bean concentrate, MEMDG-0010-MEMFaba Bean isolate, HYDDG-0015-HYD
Ash, dry basis % w/w dry basis 1.80 ± 0.270 (n=3) 2.26 ± 0.396 (n=3) 4.70 ± 0.520 (n=3) — 1.89 (n=1) 8.92 ± 1.09 (n=3) — 2.46 ± 0.0849 (n=2) — —
Moisture % w/w 64.4 ± 0.204 (n=3) 72.5 ± 0.852 (n=3) 78.2 ± 0.145 (n=3) 66.5 ± 0.235 (n=3) 67.3 ± 0.804 (n=3) 86.7 ± 0.0252 (n=3) 61.5 ± 0.361 (n=6) 73.4 ± 0.396 (n=2) — —

Solubility (Bradford) v5.0

How much of the protein dissolves, and at which pH?

Protein in the dispersion, before centrifugation (mg/mL) across pH · a panel per route, one line per ingredient; hover a line to see which

IPI isoelectric precipitation · 3

0 5 10 15 20 pH 4 pH 5 pH 6 pH 7 pH 8

MPI micellar isolation · 3

0 5 10 15 20 pH 4 pH 5 pH 6 pH 7 pH 8

MEM membrane concentration · 3

0 5 10 15 20 pH 4 pH 5 pH 6 pH 7 pH 8

HYD hydrated as supplied · 1

0 5 10 15 20 pH 4 pH 5 pH 6 pH 7 pH 8
Protein in the supernatant, after centrifugation (mg/mL) across pH · a panel per route, one line per ingredient; hover a line to see which

IPI isoelectric precipitation · 3

0 5 10 15 pH 4 pH 5 pH 6 pH 7 pH 8

MPI micellar isolation · 3

0 5 10 15 pH 4 pH 5 pH 6 pH 7 pH 8

MEM membrane concentration · 3

0 5 10 15 pH 4 pH 5 pH 6 pH 7 pH 8

HYD hydrated as supplied · 1

0 5 10 15 pH 4 pH 5 pH 6 pH 7 pH 8
Solubility (% of protein) across pH · a panel per route, one line per ingredient; hover a line to see which

IPI isoelectric precipitation · 3

0 20 40 60 80 100 pH 4 pH 5 pH 6 pH 7 pH 8

MPI micellar isolation · 3

0 20 40 60 80 100 pH 4 pH 5 pH 6 pH 7 pH 8

MEM membrane concentration · 3

0 20 40 60 80 100 pH 4 pH 5 pH 6 pH 7 pH 8

HYD hydrated as supplied · 1

0 20 40 60 80 100 pH 4 pH 5 pH 6 pH 7 pH 8

Readings above 100 % (the assay scatters near full solubility) are shown as 100 %; the downloadable files keep the values as measured.

Table: mean ± SD (n) per extract
MetricUnit Faba Bean flour (DG-0007), IPIDG-0007-IPIFaba Bean flour (DG-0007), MPIDG-0007-MPIFaba Bean flour (DG-0007), MEMDG-0007-MEMFaba Bean flour (DG-0009), IPIDG-0009-IPIFaba Bean flour (DG-0009), MPIDG-0009-MPIFaba Bean flour (DG-0009), MEMDG-0009-MEMFaba Bean concentrate, IPIDG-0010-IPIFaba Bean concentrate, MPIDG-0010-MPIFaba Bean concentrate, MEMDG-0010-MEMFaba Bean isolate, HYDDG-0015-HYD
Protein in the supernatant, after centrifugation, pH 4 mg/mL 0.0239 (n=1) 3.36 (n=1) 0.292 (n=1) 0.117 (n=1)6 0.889 (n=1)7 0.316 (n=1)6 0.0960 (n=1) 0.508 (n=1)6 1.01 (n=1)6 0.0660 (n=1)
Protein in the supernatant, after centrifugation, pH 5 mg/mL 0.0628 (n=1) 0.0643 (n=1) 0.261 (n=1) 0.524 (n=1)6 0.720 (n=1)7 0.857 (n=1)6 0.370 (n=1) 0.972 (n=1)6 0.788 (n=1)6 0.0463 (n=1)
Protein in the supernatant, after centrifugation, pH 6 mg/mL 5.05 (n=1) 0.782 (n=1) 0.730 (n=1) 7.34 (n=1)6 10.4 (n=1)7 10.7 (n=1)6 9.19 (n=1) 6.81 (n=1)6 6.99 (n=1)6 0.299 (n=1)
Protein in the supernatant, after centrifugation, pH 7 mg/mL 8.51 (n=1) 4.38 (n=1) 3.80 (n=1) 10.0 (n=1)6 10.3 (n=1)7 10.8 (n=1)6 13.2 (n=1) 8.03 (n=1)6 7.88 (n=1)6 0.375 (n=1)
Protein in the supernatant, after centrifugation, pH 8 mg/mL 8.78 (n=1) 4.64 (n=1) 4.00 (n=1) 10.7 (n=1)6 10.7 (n=1)7 10.9 (n=1)6 13.2 (n=1) 8.15 (n=1)6 8.03 (n=1)6 0.429 (n=1)
Protein in the dispersion, before centrifugation, pH 4 mg/mL 8.96 (n=1) 7.67 (n=1) 8.09 (n=1) 8.58 (n=1)6 9.14 (n=1)7 8.36 (n=1)6 12.4 (n=1) 16.9 (n=1)6 12.4 (n=1)6 9.04 (n=1)
Protein in the dispersion, before centrifugation, pH 5 mg/mL 8.84 (n=1) 8.68 (n=1) 8.28 (n=1) 9.80 (n=1)6 7.20 (n=1)7 9.23 (n=1)6 14.3 (n=1) 14.0 (n=1)6 12.9 (n=1)6 9.40 (n=1)
Protein in the dispersion, before centrifugation, pH 6 mg/mL 8.98 (n=1) 9.03 (n=1) 8.58 (n=1) 9.87 (n=1)6 10.6 (n=1)7 10.2 (n=1)6 13.3 (n=1) 14.5 (n=1)6 13.0 (n=1)6 8.52 (n=1)
Protein in the dispersion, before centrifugation, pH 7 mg/mL 9.42 (n=1) 9.19 (n=1) 8.91 (n=1) 10.6 (n=1)6 10.2 (n=1)7 11.1 (n=1)6 14.2 (n=1) 15.1 (n=1)6 13.5 (n=1)6 7.40 (n=1)
Protein in the dispersion, before centrifugation, pH 8 mg/mL 8.59 (n=1) 8.81 (n=1) 7.72 (n=1) 11.2 (n=1)6 10.1 (n=1)7 10.3 (n=1)6 12.5 (n=1) 15.2 (n=1)6 14.3 (n=1)6 8.71 (n=1)
Solubility, pH 4 % of protein 0.270 (n=1) 43.8 (n=1) 3.59 (n=1) 1.37 (n=1)6 9.73 (n=1)7 3.78 (n=1)6 0.774 (n=1) 3.00 (n=1)6 8.15 (n=1)6 0.730 (n=1)
Solubility, pH 5 % of protein 0.710 (n=1) 0.740 (n=1) 3.15 (n=1) 5.35 (n=1)6 10.0 (n=1)7 9.27 (n=1)6 2.60 (n=1) 6.93 (n=1)6 6.10 (n=1)6 0.490 (n=1)
Solubility, pH 6 % of protein 56.2 (n=1) 8.66 (n=1) 8.51 (n=1) 74.3 (n=1)6 98.1 (n=1)7 100 (n=1)6 69.1 (n=1) 47.1 (n=1)6 53.8 (n=1)6 3.51 (n=1)
Solubility, pH 7 % of protein 90.2 (n=1) 47.6 (n=1) 42.7 (n=1) 94.5 (n=1)6 100 (n=1)7 97.2 (n=1)6 93.2 (n=1) 53.3 (n=1)6 58.3 (n=1)6 5.06 (n=1)
Solubility, pH 8 % of protein 100 (n=1) 52.6 (n=1) 51.8 (n=1) 95.2 (n=1)6 100 (n=1)7 100 (n=1)6 100 (n=1) 53.6 (n=1)6 56.3 (n=1)6 4.93 (n=1)

Caveats

  1. Measured on the dispersion filtered at 0.45 um before the reading, as the method requires. This sample's early runs measured without filtering (April 2026) are withheld from the values and curves; the instrument workbook under raw/ still holds them.Applies to DG-0009-IPI, DG-0009-MEM, DG-0009-MPI, DG-0010-IPI: Particle size (hydrodynamic diameter), Polydispersity index.
  2. Near-flat thermogram: the integrated peak is only about 0.16 J/g. The values stand as measured, but this may not be a real unfolding transition.Applies to DG-0015-HYD: Denaturation enthalpy, Denaturation onset temperature, Denaturation peak temperature.
  3. Measured under the earlier emulsion capacity method: 50% oil, homogenized at 10,000 rpm, centrifuged at 1000 rpm and 25 °C. From June 16, 2026 the method uses 60% oil, 10,500 rpm, 3000 rpm and 20 °C, so values from the two versions are not directly comparable.Applies to DG-0007-IPI, DG-0007-MEM, DG-0007-MPI: Emulsion capacity, Emulsion heat stability.
  4. Measured under an earlier version of the emulsion capacity method (April 2026: 4 mL oil to 4 mL dispersion, centrifuged at 3000 rpm for 25 minutes at 20 °C). Not directly comparable with later measurements.Applies to DG-0010-IPI: Emulsion capacity, Emulsion heat stability.
  5. Measured under an earlier emulsion stability procedure, with the homogenizer vial held by hand; the current method (version 5.0) holds the vial stationary in a stand. The oil load was not recorded. Not directly comparable with measurements made in the stand.Applies to DG-0009-IPI, DG-0009-MEM, DG-0009-MPI, DG-0010-IPI, DG-0010-MEM, DG-0010-MPI: Creaming index, Turbiscan Stability Index.
  6. Measured while the solubility method was still being developed (April 2026). The plate readings were matched to samples and dilutions afterwards from lab records. Read these values with caution until the test is repeated.Applies to DG-0009-IPI, DG-0009-MEM, DG-0010-MEM, DG-0010-MPI: Protein in the dispersion, before centrifugation, Protein in the supernatant, after centrifugation, Solubility.
  7. Measured while the solubility method was still being developed (April 2026). The plate readings were matched to samples and dilutions afterwards from lab records. Read these values with caution until the test is repeated. Solubility of this sample does not align with other similar samples and should be re-confirmed.Applies to DG-0009-MPI: Protein in the dispersion, before centrifugation, Protein in the supernatant, after centrifugation, Solubility.

Not measured

ExtractAssayReason
DG-0009-IPIECNot measured: this ingredient was extracted in April 2026, before the emulsion method was settled.
DG-0009-MPIECNot measured: this ingredient was extracted in April 2026, before the emulsion method was settled.
DG-0009-MEMECNot measured: this ingredient was extracted in April 2026, before the emulsion method was settled.
DG-0009-IPIMASH (ash)Ash not reported: the sample did not ash completely, and it was not re-measured.
DG-0010-MPIECNot measured, and the material cannot be re-run at present.
DG-0010-MEMECNot measured, and the material cannot be re-run at present.
DG-0010-MEMMASHNot measured, and the material cannot be re-run at present.
DG-0010-IPIMASH (ash)Ash not reported: the sample did not ash completely while the furnace procedure was being established, and it was not re-measured.
DG-0010-IPIGELNo gel formed: the dispersion did not set after the 90 °C water bath, and the texture analyzer registered only its trigger force, so there was nothing to measure.