Ingredients · by function · release 2026.1

Gel texture

How firm and springy a gel does the protein form when heated? Plotted for each published ingredient: 32 extracts of 14 ingredients. Add the ones that fit your product to the shortlist, then compare them on every assay. IPI, MPI and MEM are extracts the Data Garden made from each flour or concentrate; HYD is a hydrated isolate, measured using the same methods.

Filter by value

Measure

Protein
Moisture and ash
Solubility
Particle size
Denaturation
Emulsion capacity
Emulsion kinetics
Foam
Gel texture
at pH

An ingredient stays when at least one of its extracts meets every filter. Filters hide what fails; they never sort.

Texture profile (g) force against time over the two compressions · a panel per route, one line per ingredient; hover a line to see which

IPI isoelectric precipitation · 9

-50 0 50 100 150 0 s 2 s 4 s 6 s 8 s 10 s 12 s

MPI micellar isolation · 9

-50 0 50 100 150 0 s 2 s 4 s 6 s 8 s 10 s 12 s

MEM membrane concentration · 10

-50 0 50 100 150 0 s 2 s 4 s 6 s 8 s 10 s 12 s

HYD hydrated as supplied · 4

-50 0 50 100 150 0 s 2 s 4 s 6 s 8 s 10 s 12 s
Gel hardness (g) by ingredient and route
0 50 100 150 Faba Bean concentrate Faba Bean flour #07 Faba Bean flour #09 Faba Bean isolate Hemp flour Pea concentrate Pea flour Pea isolate Pumpkin flour Sesame flour Soybean flour Soybean isolate #12 Soybean isolate #14 Sunflower flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Gel cohesiveness by ingredient and route
0.4 0.6 0.8 1 Faba Bean concentrate Faba Bean flour #07 Faba Bean flour #09 Faba Bean isolate Hemp flour Pea concentrate Pea flour Pea isolate Pumpkin flour Sesame flour Soybean flour Soybean isolate #12 Soybean isolate #14 Sunflower flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Gel springiness by ingredient and route
0 0.25 0.5 0.75 1 Faba Bean concentrate Faba Bean flour #07 Faba Bean flour #09 Faba Bean isolate Hemp flour Pea concentrate Pea flour Pea isolate Pumpkin flour Sesame flour Soybean flour Soybean isolate #12 Soybean isolate #14 Sunflower flour

IPI, isoelectric precipitationMPI, micellar isolationMEM, membrane concentrationHYD, hydrated as supplied Whiskers: ± SD; dashed outline and small number: under the caveat of that number (listed below; click the bar to see it); bold outline: on your shortlist. Ingredients in crop order.

Detail: Gel hardness, every value, one row per ingredient, with your shortlist buttons

IPI, isoelectric precipitation MPI, micellar isolation MEM, membrane concentration HYD, hydrated as supplied Dot: extract mean; whisker: ± SD; dashed ring and small number: under the caveat of that number (listed below; hover for its text).

Ingredient Gel hardness, g Means (g) Shortlist
Faba Bean concentrate DG-0010 MPI 50.2MEM 33.4
Faba Bean flour (DG-0007) DG-0007 IPI 7.13MPI 57.2MEM 39.4
Faba Bean flour (DG-0009) DG-0009 IPI 13.6MPI 33.1MEM 23.0
Faba Bean isolate DG-0015 HYD 73.6
Hemp flour DG-0001 IPI 120MPI 65.9MEM 112
Lupin isolate DG-0016 No gel formed: the hydrated lupin isolate stayed a pourable, deep yellow liquid after the 90 °C water bath, with a few very soft gel fragments floating in it, so no texture measurement was taken.
Pea concentrate DG-0006 IPI 30.6MPI 23.2MEM 25.1
Pea flour DG-0004 IPI 11.2MPI 6.58MEM 16.3
Pea isolate DG-0011 HYD 5.03
Pumpkin flour DG-0002 IPI 7.02MPI 110MEM 70.8
Sesame flour DG-0008 IPI 33.6MPI 104MEM 22.9
Soybean flour DG-0005 IPI 12.21MEM 9.701
Soybean isolate (DG-0012) DG-0012 HYD 7.63
Soybean isolate (DG-0013) DG-0013 No gel formed: the hydrated soy isolate (dispersion type) stayed a pourable, silvery white liquid after the 90 °C water bath, with a slimy white rim, so no texture measurement was taken.
Soybean isolate (DG-0014) DG-0014 HYD 27.5
Sunflower flour DG-0003 IPI 20.1MPI 23.1MEM 7.12
Detail: Gel cohesiveness, every value, one row per ingredient, with your shortlist buttons

IPI, isoelectric precipitation MPI, micellar isolation MEM, membrane concentration HYD, hydrated as supplied Dot: extract mean; whisker: ± SD; dashed ring and small number: under the caveat of that number (listed below; hover for its text).

Ingredient Gel cohesiveness Means Shortlist
Faba Bean concentrate DG-0010 MPI 0.773MEM 0.605
Faba Bean flour (DG-0007) DG-0007 IPI 0.512MPI 0.799MEM 0.607
Faba Bean flour (DG-0009) DG-0009 IPI 0.645MPI 0.831MEM 0.645
Faba Bean isolate DG-0015 HYD 0.615
Hemp flour DG-0001 IPI 0.702MPI 0.699MEM 0.791
Lupin isolate DG-0016 No gel formed: the hydrated lupin isolate stayed a pourable, deep yellow liquid after the 90 °C water bath, with a few very soft gel fragments floating in it, so no texture measurement was taken.
Pea concentrate DG-0006 IPI 0.671MPI 0.814MEM 0.581
Pea flour DG-0004 IPI 0.824MPI 0.695MEM 0.763
Pea isolate DG-0011 HYD 0.794
Pumpkin flour DG-0002 IPI 0.641MPI 0.751MEM 0.743
Sesame flour DG-0008 IPI 0.553MPI 0.643MEM 0.530
Soybean flour DG-0005 IPI 0.9091MEM 0.8041
Soybean isolate (DG-0012) DG-0012 HYD 0.921
Soybean isolate (DG-0013) DG-0013 No gel formed: the hydrated soy isolate (dispersion type) stayed a pourable, silvery white liquid after the 90 °C water bath, with a slimy white rim, so no texture measurement was taken.
Soybean isolate (DG-0014) DG-0014 HYD 0.823
Sunflower flour DG-0003 IPI 0.569MPI 0.540MEM 0.552
Detail: Gel springiness, every value, one row per ingredient, with your shortlist buttons

IPI, isoelectric precipitation MPI, micellar isolation MEM, membrane concentration HYD, hydrated as supplied Dot: extract mean; whisker: ± SD; dashed ring and small number: under the caveat of that number (listed below; hover for its text).

Ingredient Gel springiness Means Shortlist
Faba Bean concentrate DG-0010 MPI 0.852MEM 0.731
Faba Bean flour (DG-0007) DG-0007 IPI 0.129MPI 0.863MEM 0.768
Faba Bean flour (DG-0009) DG-0009 IPI 0.537MPI 0.829MEM 0.684
Faba Bean isolate DG-0015 HYD 0.832
Hemp flour DG-0001 IPI 0.846MPI 0.712MEM 0.822
Lupin isolate DG-0016 No gel formed: the hydrated lupin isolate stayed a pourable, deep yellow liquid after the 90 °C water bath, with a few very soft gel fragments floating in it, so no texture measurement was taken.
Pea concentrate DG-0006 IPI 0.788MPI 0.775MEM 0.665
Pea flour DG-0004 IPI 0.627MPI 0.174MEM 0.686
Pea isolate DG-0011 HYD 0.0702
Pumpkin flour DG-0002 IPI 0.196MPI 0.766MEM 0.795
Sesame flour DG-0008 IPI 0.674MPI 0.679MEM 0.522
Soybean flour DG-0005 IPI 0.7711MEM 0.4771
Soybean isolate (DG-0012) DG-0012 HYD 0.658
Soybean isolate (DG-0013) DG-0013 No gel formed: the hydrated soy isolate (dispersion type) stayed a pourable, silvery white liquid after the 90 °C water bath, with a slimy white rim, so no texture measurement was taken.
Soybean isolate (DG-0014) DG-0014 HYD 0.813
Sunflower flour DG-0003 IPI 0.630MPI 0.426MEM 0.157

Caveats

  1. The gels were heated at about 80 °C instead of the method's 90 °C: the water bath cooled after the samples went in. These proteins unfold at about 94 °C, so gel firmness is likely understated, and the micellar extract did not form a gel.Applies to DG-0005-IPI, DG-0005-MEM: Gel cohesiveness, Gel hardness, Gel springiness.

Method: Gel Strength v5.0, in the methods compendium.